Rechercher une page de manuel
tv_grab_uk_rt.1p
Langue: en
Version: 2010-05-25 (ubuntu - 24/10/10)
Section: 1 (Commandes utilisateur)
Sommaire
NAME
tv_grab_uk_rt - Grab TV listings for United Kingdom/Republic of IrelandSYNOPSIS
tv_grab_uk_rt --helptv_grab_uk_rt --version
tv_grab_uk_rt --capabilities
tv_grab_uk_rt --description
tv_grab_uk_rt [--config-file FILE]
[--days N] [--offset N]
[--output FILE] [--quiet] [--debug]
tv_grab_uk_rt --configure [--config-file FILE]
tv_grab_uk_rt --configure-api [--stage NAME]
[--config-file FILE] [--output FILE]
tv_grab_uk_rt --list-channels [--config-file FILE]
[--output FILE] [--quiet] [--debug]
tv_grab_uk_rt --list-lineups
tv_grab_uk_rt --lineup LINEUP_ID
DESCRIPTION
Output TV listings in XMLTV format for many channels available in the United Kingdom and Republic of Ireland. Source data comes from machine-readable files made available from the Radio Times website.USAGE
First run tv_grab_uk_rt --configure to choose which channels you want to receive listings for. Then run tv_grab_uk_rt with no arguments to get around 14 days of listings for your configured channels.OPTIONS
--help Print a help message and exit.--version Show the versions of the XMLTV libraries, the grabber and of key modules used for processing listings.
--capabilities Show which capabilities the grabber supports. For more information, see <http://xmltv.org/wiki/xmltvcapabilities.html>
--description Show a brief description of the grabber.
--config-file FILE Specify the name of the configuration file to use. If not specified, a default of ~/.xmltv/tv_grab_uk_rt.conf is used. This is the file written by --configure and read when grabbing.
--output FILE When grabbing, write output to FILE rather than to standard output.
--days N When grabbing, grab N days of data instead of all available. Supported values are 1-15.
--offset N Start grabbing at today + N days. Supported values are 0-14.
Note that due to the format of the source data, tv_grab_uk_rt always downloads data for all days and then filters for days specified with --days and --offset. Specifying --days and/or --offset in order to speed up downloads or reduce data transfer will therefore not work.
--quiet Suppress all progress messages normally written to standard error.
--debug Provide detailed progress messages to standard error. Due to the volume of debug information produced, it is not advised to use this option during normal grabber use.
--gui OPTION Use this option to enable a graphical interface to be used. OPTION may be 'Tk', or left blank for the best available choice. Additional allowed values of OPTION are 'Term' for normal terminal output (default) and 'TermNoProgressBar' to disable the use of Term::ProgressBar.
--configure Prompt for which channels to download listings for, where to store the cache directory for retrieved listings, what character encoding to use for output, and also specify regional and TV platform information.
--list-channels Outputs a list of every channel available to the grabber in XMLTV format.
--list-lineups Outputs a list of every channel lineup available to the grabber in XMLTV format.
--lineup LINEUP_ID Outputs the given channel lineup in XMLTV format for the given LINEUP_ID.
SOURCE DATA TERMS OF USE
All data is the copyright of the Radio Times and the use of this data is restricted to personal use only. <http://www.radiotimes.com/>In accessing this XML feed, you agree that you will only access its contents for your own personal and non-commercial use and not for any commercial or other purposes, including advertising or selling any goods or services, including any third-party software applications available to the general public.
CHARACTER ENCODING
During configuration, the software asks the user to choose the character encoding to be used for output. Current supported encodings are UTF-8 and ISO-8859-1. If any users would like support for other encodings, please contact the maintainer.TITLE PROCESSING
Over time, the listings may contain inconsistent programme details, such as the programme title combined with episode details for some showings of a programme, but separate for others; or the episode title being given as the programme title, and the programme title given as the episode title. Some programme titles may also change slightly over time, or across channels. Enabling title processing during configuration enables this software to process programme titles against a list of flagged titles. The software will correct such programme titles, which in turn should result in better performance of PVR software which rely on consistent programme data. Please be aware that enabling title processing will result in the grabber taking slightly longer to complete its operation due to the extra processing overhead.REGIONAL CHANNELS
During configuration, the software asks for UK postcode information. The first half of a user's postcode is used to determine which regional channels are likely available in their locality, and only these matching regional channels are included in the list of available channels. A user can enter 'none' during configuration to disable regional channel filtering. Users in the Republic of Ireland should use the pseudo-postcode 'EIRE' to enable filtering of regional channels. Errors are quite possible, so please report any incorrect channel/postcode information.TV PLATFORMS
After specifying a postcode, the software will ask the user to select their TV service platform (Freeview, analogue, Sky, etc) from a list. Selecting one of these entries will filter the channel selection list (shown at the end of the configuration phase) to show only those channels available on the chosen platform. If the user has entered a valid postcode, the channel list will also only include those regional channels available in the user's locality.ERROR HANDLING
tv_grab_uk_rt will only terminate early if it is impossible to continue with grabbing data. This can be due to a lack of channel configuration data, a bad/missing configuration file, or filesystem permission problems. Running the grabber in non-quiet mode should report why the grabber failed.There have been several occasions when the Radio Times channel index has been missing from the Radio Times website. This file is essential to being able to run the grabber, as it contains the list of channels having available listings data. If this file is missing or empty, and there is no locally-cached copy of the file, it will not be possible to run the grabber. The file usually regenerates automatically over the course of the next day, at which point it will be possible to run the grabber.
Non-fatal errors are reported during a grabber run, and can result in listings for a channel being skipped either in part, or entirely. Progress messages will state why data is missing when it is possible to do so. A non-zero exit status will normally be given when the grabber has encountered problems during listings retrieval.
ENVIRONMENT VARIABLES
The environment variable HOME can be set to change where the configuration file is stored. All configuration is stored in $HOME/.xmltv/ by default. On Windows it might be necessary to set HOME to a pathname containing no spaces.The environment variable XMLTV_SUPPLEMENT can be set to change where the supplemental XMLTV files are retrieved from. By default, the file is retrieved from the XMLTV supplement server. See XMLTV::Supplement for more information.
If you want the grabber to use customised local copies of the supplemental files, you should set XMLTV_SUPPLEMENT to the path of the directory containing a tv_grab_uk_rt/ directory containing the supplement files. For example, if your local supplement files are stored in /usr/local/share/xmltv/tv_grab_uk_rt/ you should 'export XMLTV_SUPPLEMENT=/usr/local/share/xmltv/' before running the grabber.
RADIO LISTINGS
Ironically, the Radio Times does not offer listings for radio. They have been asked about the possibility of adding radio listings, but stated that this would require significant development effort. It has not been ruled out entirely, but is unlikely to be added soon.Users who would like to obtain BBC radio listings in XMLTV format are advised to investigate a new grabber that obtains listings from the BBC Backstage service. See <http://wiki.xmltv.org/index.php/BBC_Backstage> for more information.
LINEUPS
** Work in progress ** In order to allow more straightforward configuration of programs that make use of XMLTV data, lineups contain a list of channels and their names, EPG numbers and identifiers, to allow such programs to quickly match XMLTV channel data against channels configured in the program. The intention is to allow programs to be made aware of changes to a lineup and to allow automated configuration of XMLTV listings.MAILING LIST
You can subscribe to and read the XMLTV users mailing list by visiting <http://lists.sourceforge.net/lists/listinfo/xmltv-users>. This is a source of help and advice for new users. A searchable archive of the list is available at <http://news.gmane.org/gmane.comp.tv.xmltv.general>.SEE ALSO
xmltv(5), <http://wiki.xmltv.org>, <http://www.radiotimes.com/>BUGS
If you encounter a reproducible bug, please report it on the XMLTV bug tracker at <http://sourceforge.net/tracker/?group_id=39046&atid=424135>, making sure you assign the bug to the tv_grab_uk_rt category. Please check that the bug has not already been reported.There is an ongoing issue with the Radio Times source data containing mis-encoded UTF-8 characters, which we handle automatically in the grabber and on a case-by-case basis when required. The issue has been reported to the Radio Times.
The source data on the Radio Times website is generated nightly, usually between 5-6am. Occasionally the source data may not get recreated, leaving the source files for some (or all) channels empty. Users are encouraged to wait at least 1 day before reporting an issue with missing listings, as they frequently reappear in the next update. If listings continue to be missing from the Radio Times website, please report the fact on the XMLTV users mailing list.
There are no other reported ongoing issues.
AUTHOR
Since 2007 the maintainer has been Nick Morrott (knowledgejunkie at gmail dot com).The original author was Ed Avis (ed at membled dot com). Parts of this code were copied from tv_grab_se_swedb by Mattias Holmlund, and from the XMLTV wiki <http://www.xmltv.org/wiki/>. Regional postcode information was kindly made available from <http://www.ukfree.tv>.
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre