uurate

Langue: en

Version: 260492 (debian - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

uurate - Report Taylor UUCP statistics

SYNOPSIS

uurate [ -acdefhipqtvx ] [ -s host ] [ -I config ][ logfile... ]

or simply,

uurate

for a traffic summary report.

DESCRIPTION

The uurate command provides tabular summary reports on the operation of the Taylor UUCP system. Data is taken from the currently active log files, standard input, or from a list of log files given on the command line. Output is in the form of tabular reports summarizing call, file transfer, and command execution (uuxqt) activity.

The log and stats files given to uurate must be in the ``Taylor'' or ``V2'' format. Also, note that call and file transfer activities are logged in separate files, nominally called Log and Stats, respectively. For reports to be meaningful, the Log and Stats files should be given to uurate together, and cover the same time period.

If neither the -i or -I option nor any logfile options are given, uurate defaults to taking its input from the current Taylor Log and Stats files. The names are either as defined at compilation time, in case there is no config file, or taken from the arguments of the keywords logfile and statfile when encountered in the config file. This is the normal mode of operation.

The reporting options described below can be used to select the set of reports desired. If no options are given, a summary report is displayed. If there is no relevant data for a particular report or host, that report or host will be suppressed.

OPTIONS

The following options may be given to uurate:
-a
All reports. Identical to -cfexp.
-c
Report on call statistics. Requires data from a Log file.
-d
will print the default config file to be used.
-e
Report on efficiency (total connect time versus time spent transferring files). Requires data from both a Log and a Stats file, and they must span the same time period.
-f
Report on file transfer statistics. Requires data from a Stats file.
-h
will print a short help information.
-i
tells uurate to read any logfile information from standard input.
-p
report on protocol errors and packets sent/received
-q
do not print the Environment information,
-t
All reports. Identical to -cfexp. plus the Compact summary.
-v
will print the version id string
-x
Report on remote execution requests (e.g., rmail). Requires data from a Log file.
-s host
Restrict report output to host.
-I config file
an alternate config file may be passed by this option.

DESCRIPTION OF REPORTS

There are four reports available: the call, file transfer, efficiency, and remote execution reports. Each may be selected by a command line option. All reports may be selected via the options -a or -t. If no report selection options are given, uurate displays a compact traffic summary report (see below).

Summary report

If no report options are given, uurate displays a traffic summary report. This is particularly useful in daily cron jobs which report on errors and the like. Traffic statistics for each active system is reported on a single line. If more than one system was active, a 'totals' line is included at the end of the report.

Protocol packet report

The protocol report gives statistics on min/max packet and window sizes used during transmission. Further on data is collected for packets transferred. The data is collected for each host/protocol type. The fields are described below:


 
 site     UUCP node name of neighbor host system,
 typ      Type of protocol used
 Min      minimum packet/window size
 Max      maximum packet/window size
 sent     packets sent
 resent   packets resent
 received packets received
 
 

Protocol error report

The protocol report gives statistics on packet errors
during transmission. The data is collected for each host/protocol type. The fields are described below:


 
 site          UUCP node name of neighbor host system,
 typ           Type of protocol used
 header        number of errors in header
 checksum      number of checksum errors
 order         number of order errors
 resent        number packets resent
 rem-reject    packets that the remote site rejected
 
 

Call report

The call report gives statistics on inbound and outbound calls for
each active host system. The fields are described below:


 
 site     UUCP node name of neighbor host system,
 succ.    Successful calls attempted to/by that system,
 failed   Failed calls to/by that system,
 total    Total calls to/by that system,
 time     Collected connect time (hh:mm:ss) for all calls,
 
 

File transfer reports

The file transfer reports give statistics on inbound and
outbound file transfers (regardless of which end initiated the transfer) for each active host system. There are two reports, one for files sent to the remote system and one for files received from the remote system. The fields in each report are described below:


 
 site       UUCP node name of neighbor host system
 files      Number of files transferred
 Bytes/1000  Total size of files transferred given in thousands
 xfr time   Total time (hh:mm:ss) spent on transfer the files,
 B/sec      Average transfer rate (bytes/sec).
 
 

Efficiency report

The efficiency report describes the utilization of the links
to each active remote system, giving the ratio of total connect time to the time spent actually transferring files. The fields are described below:


 
 site      UUCP node name of neighbor host system
 connected Total connect time for that system (turn-around)
 xfr time  Total file transfer time for that system
 overhead  Connect time not used to transfer files,
 eff. %    Ratio of connect time to transfer time (xfer*100/conn)
 
 

Command executions report

The remote execution report describes remotely
requested command executions from each active host system, like rmail and rnews. Up to eight command names are displayed. If there are more, the rest will be put together in an `Misc.' column. The fields are described below:


 
 site       UUCP node name of neighbor host system,
 (command)  Number of requests of this command,
 Misc.      Number of other requests, if more than eight.
 
 

FILES

The file names below may be changed at compilation time or by the
configuration file, so these are only approximations.
 
 /usr/spool/uucp/Log  V2/Taylor format call/execution log,
 /usr/spool/uucp/StatsV2/Taylor format file transfer log.
 
 

SEE ALSO

uucico(8)

BUGS

Does not understand other than V2/TAYLOR logging formats. Anyone care to
volunteer to add the not mentioned?

Scanning the arguments of logfile and statfile keywords in config should handle lines continued with the backslash as well.

The failfm field in the call statistics table is always zero, unless something really serious happens, e.g. uucico got SIGQUIT or the whole system crashed.

AUTHOR

Robert B. Denny (denny@alisa.com).
Loosely based on the DECUS UUCP program uurate by Mark Pizzolato.
Modified by Stephan Niemz (stephan@sunlab.ka.sub.org).
Modified by Klaus Dahlenburg (kdburg@incoahe.hanse.de).