Rechercher une page de manuel

Chercher une autre page de manuel:

varnishd

Langue: en

Version: 370089 (fedora - 01/12/10)

Section: 1 (Commandes utilisateur)


BSD mandoc

NAME

varnishd - HTTP accelerator daemon

SYNOPSIS

[-a address [: port ] ] [-b host [: port ] ] [-d ] [-F ] [-f config ] [-g group ] [-h type [, options ] ] [-i identity ] [-l shmlogsize ] [-n name ] [-P file ] [-p param = value ] [-s type [, options ] ] [-T address [: port ] ] [-t ttl ] [-u user ] [-V ] [-w min [, max [, timeout ] ] ]

DESCRIPTION

The daemon accepts HTTP requests from clients, passes them on to a backend server and caches the returned documents to better satisfy future requests for the same document.

The following options are available:

-a address [: port [, address [: port ] ] ] [...]
Listen for client requests on the specified address and port The address can be a host name (``localhost'' ) an IPv4 dotted-quad (``127.0.0.1'' ) or an IPv6 address enclosed in square brackets (``[::1]'' ) If address is not specified, will listen on all available IPv4 and IPv6 interfaces. If port is not specified, the default HTTP port as listed in /etc/services is used. Multiple listening addresses and ports can be specified as a whitespace- or comma-separated list.
-b host [: port ]
Use the specified host as backend server. If port is not specified, the default is 8080.
-d
Enables debugging mode: The parent process runs in the foreground with a CLI connection on stdin/stdout, and the child process must be started explicitly with a CLI command. Terminating the parent process will also terminate the child.
-F
Run in the foreground.
-f config
Use the specified VCL configuration file instead of the builtin default. See vcl(7) for details on VCL syntax.
-g group
Specifies the name of an unprivileged group to which the child process should switch before it starts accepting connections. This is a shortcut for specifying the group run-time parameter.
-h type [, options ]
Specifies the hash algorithm. See Sx Hash Algorithms for a list of supported algorithms.
-i identity
Specify the identity of the varnish server. This can be accessed using server.identity from VCL
-l shmlogsize
Specify size of shmlog file. Scaling suffixes like 'k', 'm' can be used up to (e)tabytes. Default is 80 Megabytes. Specifying less than 8 Megabytes is unwise.
-n name
Specify a name for this instance. Amonst other things, this name is used to construct the name of the directory in which keeps temporary files and persistent state. If the specified name begins with a forward slash, it is interpreted as the absolute path to the directory which should be used for this purpose.
-P file
Write the process's PID to the specified file
-p param = value
Set the parameter specified by param to the specified value See Sx Run-Time Parameters for a list of parameters.
-S file
Path to a file containing a secret used for authorizing access to the management port.
-s type [, options ]
Use the specified storage backend. See Sx Storage Types for a list of supported storage types. This option can be used multiple times to specify multiple storage files.
-T address [: port ]
Offer a management interface on the specified address and port See Sx Management Interface for a list of management commands.
-t ttl
Specifies a hard minimum time to live for cached documents. This is a shortcut for specifying the default_ttl run-time parameter.
-u user
Specifies the name of an unprivileged user to which the child process should switch before it starts accepting connections. This is a shortcut for specifying the user run-time parameter.

If specifying both a user and a group, the user should be specified first.

-V
Display the version number and exit.
-w min [, max [, timeout ] ]
Start at least min but no more than max worker threads with the specified idle timeout. This is a shortcut for specifying the thread_pool_min thread_pool_max and thread_pool_timeout run-time parameters.

If only one number is specified, thread_pool_min and thread_pool_max are both set to this number, and thread_pool_timeout has no effect.

Hash Algorithms

The following hash algorithms are available:
simple_list
A simple doubly-linked list. Not recommended for production use.
classic [, buckets ]
A standard hash table. This is the default.

The hash key is the CRC32 of the object's URL modulo the size of the hash table. Each table entry points to a list of elements which share the same hash key.

The buckets parameter specifies the number of entries in the hash table. The default is 16383.

Storage Types

The following storage types are available:
malloc [, size
]
Storage for each object is allocated with malloc(3).

The size parameter specifies the maximum amount of memory varnishd will allocate. The size is assumed to be in bytes, unless followed by one of the following suffixes:

K, k
The size is expressed in kibibytes.
M, m
The size is expressed in mebibytes.
G, g
The size is expressed in gibibytes.
T, t
The size is expressed in tebibytes.

The default size is unlimited.

file [, path [, size [, granularity ] ] ]
Storage for each object is allocated from an arena backed by a file. This is the default.

The path parameter specifies either the path to the backing file or the path to a directory in which will create the backing file. The default is /tmp

The size parameter specifies the size of the backing file. The size is assumed to be in bytes, unless followed by one of the following suffixes:

K, k
The size is expressed in kibibytes.
M, m
The size is expressed in mebibytes.
G, g
The size is expressed in gibibytes.
T, t
The size is expressed in tebibytes.
%
The size is expressed as a percentage of the free space on the file system where it resides.

The default size is 50%.

If the backing file already exists, it will be truncated or expanded to the specified size.

Note that if has to create or expand the file, it will not pre-allocate the added space, leading to fragmentation, which may adversely impact performance. Pre-creating the storage file using dd(1) will reduce fragmentation to a minimum.

The granularity parameter specifies the granularity of allocation. All allocations are rounded up to this size. The size is assumed to be in bytes, unless followed by one of the suffixes described for size except for %.

The default size is the VM page size. The size should be reduced if you have many small objects.

Management Interface

If the -T option was specified, will offer a command-line management interface on the specified address and port. The following commands are available:
help [command ]
Display a list of available commands.

If the command is specified, display help for this command.

param.set param value
Set the parameter specified by param to the specified value See Sx Run-Time Parameters for a list of parameters.
param.show [-l ] [param ]
Display a list if run-time parameters and their values.

If the -l option is specified, the list includes a brief explanation of each parameter.

If a param is specified, display only the value and explanation for this parameter.

ping [timestamp ]
Ping the Varnish cache process, keeping the connection alive.
purge field operator argument [&& field operator argument [... ] ]
Immediately invalidate all documents matching the purge expression. See Purge expressions for more documentation and examples.
purge.list
Display the purge list.

All requests for objects from the cache are matched against items on the purge list. If an object in the cache is older than a matching purge list item, it is considered Qq purged , and will be fetched from the backend instead.

When a purge expression is older than all the objects in the cache, it is removed from the list.

purge.url regexp
Immediately invalidate all documents whose URL matches the specified regular expression.
quit
Close the connection to the varnish admin port.
start
Start the Varnish cache process if it is not already running.
stats
Show summary statistics.

All the numbers presented are totals since server startup; for a better idea of the current situation, use the varnishstat(1) utility.

status
Check the status of the Varnish cache process.
stop
Stop the Varnish cache process.
url.purge regexp
Deprecated, see purge.url instead.
vcl.discard configname
Discard the configuration specified by configname This will have no effect if the specified configuration has a non-zero reference count.
vcl.inline configname vcl
Create a new configuration named configname with the VCL code specified by vcl which must be a quoted string.
vcl.list
List available configurations and their respective reference counts. The active configuration is indicated with an asterisk ("*").
vcl.load configname filename
Create a new configuration named configname with the contents of the specified file.
vcl.show configname
Display the source code for the specified configuration.
vcl.use configname
Start using the configuration specified by configname for all new requests. Existing requests will continue using whichever configuration was in use when they arrived.

Run-Time Parameters

Runtime parameters are marked with shorthand flags to avoid repeating the same text over and over in the table below. The meaning of the flags are:

experimental
We have no solid information about good/bad/optimal values for this parameter. Feedback with experience and observations are most welcome.
delayed
This parameter can be changed on the fly, but will not take effect immediately.
restart
The worker process must be stopped and restarted, before this parameter takes effect.
reload
The VCL programs must be reloaded for this parameter to take effect.

Here is a list of all parameters, current as of last time we remembered to update the manual page. This text is produced from the same text you will find in the CLI if you use the param.show command, so should there be a new parameter which is not listed here, you can find the description using the CLI commands.

Be aware that on 32 bit systems, certain default values, such as sess_workspace (=16k) and thread_pool_stack (=64k) are reduced relative to the values listed here, in order to conserve VM space.

acceptor_sleep_decay
Default: 0.900
Flags: experimental

If we run out of resources, such as file descriptors or worker threads, the acceptor will sleep between accepts.
This parameter (multiplicatively) reduce the sleep duration for each succesfull accept. (ie: 0.9 = reduce by 10%)

acceptor_sleep_incr
Units: s
Default: 0.001
Flags: experimental

If we run out of resources, such as file descriptors or worker threads, the acceptor will sleep between accepts.
This parameter control how much longer we sleep, each time we fail to accept a new connection.

acceptor_sleep_max
Units: s
Default: 0.050
Flags: experimental

If we run out of resources, such as file descriptors or worker threads, the acceptor will sleep between accepts.
This parameter limits how long it can sleep between attempts to accept new connections.

auto_restart
Units: bool
Default: on

Restart child process automatically if it dies.

ban_lurker_sleep
Units: s
Default: 0.0

How long time does the ban lurker thread sleeps between successfull attempts to push the last item up the purge list. It always sleeps a second when nothing can be done.
A value of zero disables the ban lurker.

between_bytes_timeout
Units: s
Default: 60

Default timeout between bytes when receiving data from backend. We only wait for this many seconds between bytes before giving up. A value of 0 means it will never time out. VCL can override this default value for each backend request and backend request. This parameter does not apply to pipe.

cache_vbe_conns
Units: bool
Default: off
Flags: experimental

Cache vbe_conn's or rely on malloc, that's the question.

cc_command
Default: exec cc -fpic -shared -Wl,-x -o %o %s
Flags: must_reload

Command used for compiling the C source code to a dlopen(3) loadable object. Any occurrence of %s in the string will be replaced with the source file name, and %o will be replaced with the output file name.

cli_buffer
Units: bytes
Default: 8192

Size of buffer for CLI input.
You may need to increase this if you have big VCL files and use the vcl.inline CLI command.
NB: Must be specified with -p to have effect.

cli_timeout
Units: seconds
Default: 10

Timeout for the childs replies to CLI requests from the master.

clock_skew
Units: s
Default: 10

How much clockskew we are willing to accept between the backend and our own clock.

connect_timeout
Units: s
Default: 0.4

Default connection timeout for backend connections. We only try to connect to the backend for this many seconds before giving up. VCL can override this default value for each backend and backend request.

default_grace
Default: 10seconds
Flags: delayed

Default grace period. We will deliver an object this long after it has expired, provided another thread is attempting to get a new copy.

default_ttl
Units: seconds
Default: 120

The TTL assigned to objects if neither the backend nor the VCL code assigns one.
Objects already cached will not be affected by changes made until they are fetched from the backend again.
To force an immediate effect at the expense of a total flush of the cache use "purge.url ."

diag_bitmap
Units: bitmap
Default: 0

Bitmap controlling diagnostics code:

  0x00000001 - CNT_Session states.

  0x00000002 - workspace debugging.

  0x00000004 - kqueue debugging.

  0x00000008 - mutex logging.

  0x00000010 - mutex contests.

  0x00000020 - waiting list.

  0x00000040 - object workspace.

  0x00001000 - do not core-dump child process.

  0x00002000 - only short panic message.

  0x00004000 - panic to stderr.

  0x00008000 - panic to abort2().

  0x00010000 - synchronize shmlog.

  0x00020000 - synchronous start of persistence.

  0x80000000 - do edge-detection on digest.
Use 0x notation and do the bitor in your head :-)

err_ttl
Units: seconds
Default: 0

The TTL assigned to the synthesized error pages

esi_syntax
Units: bitmap
Default: 0

Bitmap controlling ESI parsing code:

  0x00000001 - Don't check if it looks like XML

  0x00000002 - Ignore non-esi elements

  0x00000004 - Emit parsing debug records
Use 0x notation and do the bitor in your head :-)

fetch_chunksize
Units: kilobytes
Default: 128
Flags: experimental

The default chunksize used by fetcher. This should be bigger than the majority of objects with short TTLs.
Internal limits in the storage_file module makes increases above 128kb a dubious idea.

first_byte_timeout
Units: s
Default: 60

Default timeout for receiving first byte from backend. We only wait for this many seconds for the first byte before giving up. A value of 0 means it will never time out. VCL can override this default value for each backend and backend request. This parameter does not apply to pipe.

group
Default:
Flags: must_restart

The unprivileged group to run as.

http_headers
Units: header lines
Default: 64

Maximum number of HTTP headers we will deal with.
This space is preallocated in sessions and workthreads only objects allocate only space for the headers they store.

listen_address
Default: :80
Flags: must_restart

Whitespace separated list of network endpoints where Varnish will accept requests.
Possible formats: host, host:port, :port

listen_depth
Units: connections
Default: 1024
Flags: must_restart

Listen queue depth.

log_hashstring
Units: bool
Default: off

Log the hash string to shared memory log.

log_local_address
Units: bool
Default: off

Log the local address on the TCP connection in the SessionOpen shared memory record.

lru_interval
Units: seconds
Default: 2
Flags: experimental

Grace period before object moves on LRU list.
Objects are only moved to the front of the LRU list if they have not been moved there already inside this timeout period. This reduces the amount of lock operations necessary for LRU list access.

max_esi_includes
Units: includes
Default: 5

Maximum depth of esi:include processing.

max_restarts
Units: restarts
Default: 4

Upper limit on how many times a request can restart.
Be aware that restarts are likely to cause a hit against the backend, so don't increase thoughtlessly.

overflow_max
Units: %
Default: 100
Flags: experimental

Percentage permitted overflow queue length.

This sets the ratio of queued requests to worker threads, above which sessions will be dropped instead of queued.

ping_interval
Units: seconds
Default: 3
Flags: must_restart

Interval between pings from parent to child.
Zero will disable pinging entirely, which makes it possible to attach a debugger to the child.

pipe_timeout
Units: seconds
Default: 60

Idle timeout for PIPE sessions. If nothing have been received in either direction for this many seconds, the session is closed.

prefer_ipv6
Units: bool
Default: off

Prefer IPv6 address when connecting to backends which have both IPv4 and IPv6 addresses.

purge_dups
Units: bool
Default: on

Detect and eliminate duplicate purges.

rush_exponent
Units: requests per request
Default: 3
Flags: experimental

How many parked request we start for each completed request on the object.
NB: Even with the implict delay of delivery, this parameter controls an exponential increase in number of worker threads.

saintmode_threshold
Units: objects
Default: 10
Flags: experimental

The maximum number of objects held off by saint mode before no further will be made to the backend until one times out. A value of 0 disables saintmode.

send_timeout
Units: seconds
Default: 600
Flags: delayed

Send timeout for client connections. If no data has been sent to the client in this many seconds, the session is closed.
See setsockopt(2) under SO_SNDTIMEO for more information.

sendfile_threshold
Units: bytes
Default: -1
Flags: experimental

The minimum size of objects transmitted with sendfile.

sess_timeout
Units: seconds
Default: 5

Idle timeout for persistent sessions. If a HTTP request has not been received in this many seconds, the session is closed.

sess_workspace
Units: bytes
Default: 65536
Flags: delayed

Bytes of HTTP protocol workspace allocated for sessions. This space must be big enough for the entire HTTP protocol header and any edits done to it in the VCL code.
Minimum is 1024 bytes.

session_linger
Units: ms
Default: 50
Flags: experimental

How long time the workerthread lingers on the session to see if a new request appears right away.
If sessions are reused, as much as half of all reuses happen within the first 100 msec of the previous request completing.
Setting this too high results in worker threads not doing anything for their keep, setting it too low just means that more sessions take a detour around the waiter.

session_max
Units: sessions
Default: 100000

Maximum number of sessions we will allocate before just dropping connections.
This is mostly an anti-DoS measure, and setting it plenty high should not hurt, as long as you have the memory for it.

shm_reclen
Units: bytes
Default: 255

Maximum number of bytes in SHM log record.
Maximum is 65535 bytes.

shm_workspace
Units: bytes
Default: 8192
Flags: delayed

Bytes of shmlog workspace allocated for worker threads. If too big, it wastes some ram, if too small it causes needless flushes of the SHM workspace.
These flushes show up in stats as "SHM flushes due to overflow".
Minimum is 4096 bytes.

syslog_cli_traffic
Units: bool
Default: on

Log all CLI traffic to syslog(LOG_INFO).

thread_pool_add_delay
Units: milliseconds
Default: 20
Flags: experimental

Wait at least this long between creating threads.

Setting this too long results in insuffient worker threads.

Setting this too short increases the risk of worker thread pile-up.

thread_pool_add_threshold
Units: requests
Default: 2
Flags: experimental

Overflow threshold for worker thread creation.

Setting this too low, will result in excess worker threads, which is generally a bad idea.

Setting it too high results in insuffient worker threads.

thread_pool_fail_delay
Units: milliseconds
Default: 200
Flags: experimental

Wait at least this long after a failed thread creation before trying to create another thread.

Failure to create a worker thread is often a sign that the end is near, because the process is running out of RAM resources for thread stacks.
This delay tries to not rush it on needlessly.

If thread creation failures are a problem, check that thread_pool_max is not too high.

It may also help to increase thread_pool_timeout and thread_pool_min, to reduce the rate at which treads are destroyed and later recreated.

thread_pool_max
Units: threads
Default: 500
Flags: delayed, experimental

The maximum number of worker threads in all pools combined.

Do not set this higher than you have to, since excess worker threads soak up RAM and CPU and generally just get in the way of getting work done.

thread_pool_min
Units: threads
Default: 5
Flags: delayed, experimental

The minimum number of threads in each worker pool.

Increasing this may help ramp up faster from low load situations where threads have expired.

Minimum is 2 threads.

thread_pool_purge_delay
Units: milliseconds
Default: 1000
Flags: delayed, experimental

Wait this long between purging threads.

This controls the decay of thread pools when idle(-ish).

Minimum is 100 milliseconds.

thread_pool_stack
Units: bytes
Default: -1
Flags: experimental

Worker thread stack size. In particular on 32bit systems you may need to tweak this down to fit many threads into the limited address space.

thread_pool_timeout
Units: seconds
Default: 300
Flags: delayed, experimental

Thread idle threshold.

Threads in excess of thread_pool_min, which have been idle for at least this long are candidates for purging.

Minimum is 1 second.

thread_pools
Units: pools
Default: 2
Flags: delayed, experimental

Number of worker thread pools.

Increasing number of worker pools decreases lock contention.

Too many pools waste CPU and RAM resources, and more than one pool for each CPU is probably detrimal to performance.

Can be increased on the fly, but decreases require a restart to take effect.

thread_stats_rate
Units: requests
Default: 10
Flags: experimental

Worker threads accumulate statistics, and dump these into the global stats counters if the lock is free when they finish a request.
This parameters defines the maximum number of requests a worker thread may handle, before it is forced to dump its accumulated stats into the global counters.

user
Default:
Flags: must_restart

The unprivileged user to run as. Setting this will also set "group" to the specified user's primary group.

vcl_trace
Units: bool
Default: off

Trace VCL execution in the shmlog.
Enabling this will allow you to see the path each request has taken through the VCL program.
This generates a lot of logrecords so it is off by default.

waiter
Default: default
Flags: must_restart, experimental

Select the waiter kernel interface.

Purge expressions

A purge expression consists of one or more conditions. A condition consists of a field, an operator, and an argument. Conditions can be ANDed together with Qq && .

A field can be any of the variables from VCL, for instance req.url req.http.host or obj.set-cookie

Operators are Qq == for direct comparision, Qq ~ for a regular expression match, and Qq > or Qq < for size comparisons. Prepending an operator with Qq ! negates the expression.

The argument could be a quoted string, a regexp, or an integer. Integers can have Qq KB , Qq MB , Qq GB or Qq TB appended for size related fields.

Simple example: All requests where req.url exactly matches the string /news are purged from the cache.

 req.url == "/news"
 

Example: Purge all documents where the name does not end with Qq .ogg , and where the size of the object is greater than 10 megabytes.

 req.url !~ "\.ogg$" && obj.size > 10MB
 

Example: Purge all documents where the serving host is Qq example.com or Qq www.example.com , and where the Set-Cookie header received from the backend contains Qq USERID=1663 .

 req.http.host ~ "^(www\.)example.com$" && obj.set-cookie ~ "USERID=1663"
 

SEE ALSO

varnishlog(1), varnishhist(1), varnishncsa(1), varnishstat(1), varnishtop(1), vcl(7)

HISTORY

The daemon was developed by An Poul-Henning Kamp Aq phk@phk.freebsd.dk in cooperation with Verdens Gang AS and Linpro AS. This manual page was written by An Dag-Erling Sm/orgrav Aq des@des.no with updates by An Stig Sandbeck Mathisen Aq ssm@debian.org
Les doigts d'une main ne se ressemblent pas.
-+- Dicton bouddhiste -+-