Rechercher une page de manuel

Chercher une autre page de manuel:

wayv.conf

Langue: en

Version: August 2003 (ubuntu - 07/07/09)

Autres sections - même nom

Section: 1 (Commandes utilisateur)

DESCRIPTION

wayv.conf - configuration file for wayV

FILE LAYOUT

Different Gesture Matching Techniques

wayV has two different techniques for matching gestures, overtime this will expand.

The key to set is Think, of which there are two possible options:

         1. Pda
                 It works well and can recognize over 40 different
                 gestures. It doesn't take into consideration the
                 direction the gesture is drawn in. Note this will
                 always find a matching gesture - even if its very
                 baldy wrong.
 
         2. Pda & Vector
                 Like Pda above except it takes direction into
                 consideration. It works at the moment but further
                 work is required.
 
                 The direction is recorded in the Gesture sub-key
                 vector, which is comma delimited and set-able to
                 N, NE, E, SE, S, SW, W and NW
 
 

Configuring Gestures & Actions

The main, and required, configuration file is called "wayv.conf". When you read the words "configuration file" from here on presume its wayv.conf.

In wayv.conf you'll primarily be interested in the Action sub-sections.

Every gesture has an action associated with it - to find out what action is associated with what gesture have a look at a Gesture section - they start with the text "Gesture {" and end with the text "}", e.g.

                 name = "A";
                 description = "A";
                 shape =
                  0, 0, 0, 0, 1, 0, 0, 0
                 , 0, 0, 0, 1, 1, 1, 0, 0
                 , 0, 0, 0, 1, 0, 1, 0, 0
                 , 0, 0, 1, 0, 0, 1, 0, 0
                 , 0, 1, 0, 0, 0, 0, 1, 0
                 , 0, 1, 0, 0, 0, 0, 1, 0
                 , 1, 1, 0, 0, 0, 0, 1, 1
                 , 1, 0, 0, 0, 0, 0, 0, 1
                 ;
                 vector = NE, SE;
                 action = "Action A";
 

Every Gesture section has a sub-key called "action =", the text between the quotes (after the equal) is the Action section associated with the gesture.

The vector sub-key is a new addition in 0.2.

Every action section starts with "Action {" and ends with "}", e.g.

                 name = "Action A";
                 process = exec "netscape";
                 match = "";
 

The action sub-key "name =" is how a gesture is matched with an action. When Gesture.action = Action.name the action sub-key "process =" is used to carry out commands.

The action sub-key "process =" can compose of three different commands:

         1. exec "COMMAND TO EXECUTE GOES HERE"
                 Starts a program
 
         2. warp
                 Jumps the mouse back to the initial start position of
                 a gesture
 
         3. delay "INTEGER OF SECONDS TO WAIT"
                 Wait so many seconds (useful when combined with sendkey)
 
         4. kill
                 Kill the last command executed by wayV, this is handy
                 for canceling mismatched actions
 
         5. sendkey "SPACE DELIMITED ALIAS(ES) FROM KEYMAP FILE"
                 Send a keypress to the active application or window
                 manager. Its the same as a key been pressed on the
                 keyboard.
 
                 An example of a composite keypress is:
                         sendkey "Control_L+c c"
                 (see HOWTO-wayv-keymap for more information)
 

and there can be multiple commands each separated by a comma, e.g. process = warp, exec "xcalc", sendkey "o n e";

Activating Gesture Capture & Processing (was Mouse Activation)

When using wayV you need to press specific key and mouse button combinations to activate gesture capture. Once a gesture is captured its checked to see if there are any associated actions.

The key in the configuration file to setup what actives the gesture capture is the "Launch =" key. It can have multiple parameters each seperated by a ",". The parameters are:

         Mx (where x is any number greater than 0) = Which mouse
                              button must be held down when
                              drawing a gesture
         SHIFT = Shift Key
         LOCK = Caps Lock On/Off
         CONTROL = Control Key
         MOD1, MOD2, MOD3, MOD4, MOD5 = Other keys which can
                                        be assigned with the
                                        unix command 'xmodmap'.
 

An example of the setup wayV requires to begin gesture capture when mouse button 1 is held down is:

       Launch = "M1";

Another example to begin gesture capture when the Shift key and mouse button 2 is held down is:

       Launch = "M2,SHIFT";

A final example for when the Shift key, the Control Key and mouse button 3 is held down is:

       Launch = "M3,SHIFT,CONTROL";

Note: There CAN only be one mouse button used as part of activation, i.e. you cannot hold down multiple mouse buttons but multiple keys pressed at once can be setup and used.

Controlling The Display

The display has been considerably improved and rewritten for version 0.2.

The structure that has to contain the keys for the display is called Pretty. We'll go through each key in it in turn, note that some of the keys do interact with each other and change the overall result:

         1. display
                 This is the main key - controls what type of
                 gesture input window, if any, appears. When a
                 gesture input window appears the path followed
                 by the pointer through it should be shown.
 
                 Can be set to:
                         - yes
                                 full screen input window that
                                 pops up on gesture activation
                         - no
                                 no input window but the gestures
                                 are still capture on gesture
                                 activation
                         - X, Y, WIDTH, HEIGHT
                                 always on screen input window
 
                                 X = Upper left hand corner
                                     the input window starts
                                     on
                                 Y = Upper left hand corner
                                     the input window starts
                                     on
                                 WIDTH = width of the input window
                                 HEIGHT = height of the input window
 
         2. managed
                 Turns on or off whether the window manager attempts
                 to control the input window. This is only relevant
                 for input windows that has the X, Y, WIDTH, HEIGHT
                 set.
 
                         - yes
                                 input window is exactly like all the
                                 other applications on your desktop
                         - no
                                 the input window cannot be moved or
                                 managed. This is handy for PDAs (personal
                                 digital assistants)
 
         3. color
                 Not yet usable
 
         4. size
                 If an input window is used this controls the width
                 of the lines drawn by the gesture path.
 
         5. feedback
                 A very handy feature which I think is quite handy. If
                 its on a text box appears in the middle of the screen
                 after a gesture is inputted.
 
                 The text box tells the user what Action is matched with
                 the inputed gesture.
 
                         - yes
                                 Especially handy if used in combination
                                 with a gesture for the kill command (see
                                 above in "Configuration Gestures & Actions")
 
                         - no
                                 no user feedback box
 
         6. wait
                 Length of time the user feedback, if its on, appears
                 on the screen.
 
 

FURTHER INFORMATION

Right that should be enough to get people started. Have a look at the wayV website for more information and at the mailing lists for further help.

AUTHOR

wayV was written by Mike Bennett (smoog at stressbunny dot com) with contributions from various others.

URL

wayV - http://www.stressbunny.com/wayv

SEE ALSO

wayv(1)
11:04 c'est top fort, le site linuxfr est vraiment bien mais des que tu
met le mot 'EPITA' ca devient la foire du trone... :)
11:05 1104 faut juste pas oublier de tirer la chasse ;)