Rechercher une page de manuel
SerialPort
Langue: en
Version: 341100 (ubuntu - 24/10/10)
Section: 3 (Bibliothèques de fonctions)
Sommaire
- NAME
- SYNOPSIS
- Detailed Description
- Member Typedef Documentation
- Member Enumeration Documentation
- Constructor & Destructor Documentation
- Member Function Documentation
- void SerialPort::Close () throw (NotOpen)
- BaudRate SerialPort::GetBaudRate () const throw ( NotOpen, std::runtime_error )
- CharacterSize SerialPort::GetCharSize () const throw (NotOpen)
- bool SerialPort::GetCts () const throw ( NotOpen, std::runtime_error )
- bool SerialPort::GetDsr () const throw ( NotOpen, std::runtime_error )
- bool SerialPort::GetDtr () const throw ( NotOpen, std::runtime_error )
- FlowControl SerialPort::GetFlowControl () const throw ( NotOpen )
- StopBits SerialPort::GetNumOfStopBits () const throw (NotOpen)
- Parity SerialPort::GetParity () const throw (NotOpen)
- bool SerialPort::GetRts () const throw ( NotOpen, std::runtime_error )
- bool SerialPort::IsDataAvailable () const throw (NotOpen)
- bool SerialPort::IsOpen () const
- void SerialPort::Open (const BaudRate baudRate = BAUD_DEFAULT, const CharacterSize charSize = CHAR_SIZE_DEFAULT, const Parity parityType = PARITY_DEFAULT, const StopBits stopBits = STOP_BITS_DEFAULT, const FlowControl flowControl = FLOW_CONTROL_DEFAULT) throw ( AlreadyOpen, OpenFailed, UnsupportedBaudRate, std::invalid_argument )
- SerialPort& SerialPort::operator= (const SerialPort & otherSerialPort) [private]
- void SerialPort::Read (DataBuffer & dataBuffer, const unsigned int numOfBytes = 0, const unsigned int msTimeout = 0) throw ( NotOpen, ReadTimeout, std::runtime_error )
- unsigned char SerialPort::ReadByte (const unsigned int msTimeout = 0) throw ( NotOpen, ReadTimeout, std::runtime_error )
- const std::string SerialPort::ReadLine (const unsigned int msTimeout = 0, const char lineTerminator = '\n') throw ( NotOpen, ReadTimeout, std::runtime_error )
- void SerialPort::SetBaudRate (const BaudRate baudRate) throw ( UnsupportedBaudRate, NotOpen, std::invalid_argument )
- void SerialPort::SetCharSize (const CharacterSize charSize) throw ( NotOpen, std::invalid_argument )
- void SerialPort::SetDtr (const bool dtrState = true) throw ( NotOpen, std::runtime_error )
- void SerialPort::SetFlowControl (const FlowControl flowControl) throw ( NotOpen, std::invalid_argument )
- void SerialPort::SetNumOfStopBits (const StopBits numOfStopBits) throw ( NotOpen, std::invalid_argument )
- void SerialPort::SetParity (const Parity parityType) throw ( NotOpen, std::invalid_argument )
- void SerialPort::SetRts (const bool rtsState = true) throw ( NotOpen, std::runtime_error )
- void SerialPort::Write (const std::string & dataString) throw ( NotOpen, std::runtime_error )
- void SerialPort::Write (const DataBuffer & dataBuffer) throw ( NotOpen, std::runtime_error )
- void SerialPort::WriteByte (const unsigned char dataByte) throw ( NotOpen, std::runtime_error )
- Member Data Documentation
- Author
NAME
SerialPort -SYNOPSIS
#include <SerialPort.h>
Classes
class AlreadyOpen
class NotOpen
class OpenFailed
class ReadTimeout
class UnsupportedBaudRate
Public Types
enum BaudRate { BAUD_50 = B50, BAUD_75 = B75, BAUD_110 = B110, BAUD_134 = B134, BAUD_150 = B150, BAUD_200 = B200, BAUD_300 = B300, BAUD_600 = B600, BAUD_1200 = B1200, BAUD_1800 = B1800, BAUD_2400 = B2400, BAUD_4800 = B4800, BAUD_9600 = B9600, BAUD_19200 = B19200, BAUD_38400 = B38400, BAUD_57600 = B57600, BAUD_115200 = B115200, BAUD_230400 = B230400, BAUD_DEFAULT = BAUD_57600 }
The allowed set of baud rates.
enum CharacterSize { CHAR_SIZE_5 = CS5, CHAR_SIZE_6 = CS6, CHAR_SIZE_7 = CS7, CHAR_SIZE_8 = CS8, CHAR_SIZE_DEFAULT = CHAR_SIZE_8 }
enum StopBits { STOP_BITS_1, STOP_BITS_2, STOP_BITS_DEFAULT = STOP_BITS_1 }
enum Parity { PARITY_EVEN, PARITY_ODD, PARITY_NONE, PARITY_DEFAULT = PARITY_NONE }
enum FlowControl { FLOW_CONTROL_HARD, FLOW_CONTROL_SOFT, FLOW_CONTROL_NONE, FLOW_CONTROL_DEFAULT = FLOW_CONTROL_NONE }
typedef std::vector< unsigned char > DataBuffer
Read the specified number of bytes from the serial port.
Public Member Functions
SerialPort (const std::string &serialPortName)
Constructor for a serial port.
virtual ~SerialPort () throw ()
Destructor.
void Open (const BaudRate baudRate=BAUD_DEFAULT, const CharacterSize charSize=CHAR_SIZE_DEFAULT, const Parity parityType=PARITY_DEFAULT, const StopBits stopBits=STOP_BITS_DEFAULT, const FlowControl flowControl=FLOW_CONTROL_DEFAULT) throw ( AlreadyOpen, OpenFailed, UnsupportedBaudRate, std::invalid_argument )
Open the serial port with the specified settings.
bool IsOpen () const
Check if the serial port is open for I/O.
void Close () throw (NotOpen)
Close the serial port.
void SetBaudRate (const BaudRate baudRate) throw ( UnsupportedBaudRate, NotOpen, std::invalid_argument )
Set the baud rate for the serial port to the specified value (baudRate).
BaudRate GetBaudRate () const throw ( NotOpen, std::runtime_error )
Get the current baud rate for the serial port.
void SetCharSize (const CharacterSize charSize) throw ( NotOpen, std::invalid_argument )
Set the character size for the serial port.
CharacterSize GetCharSize () const throw (NotOpen)
Get the current character size for the serial port.
void SetParity (const Parity parityType) throw ( NotOpen, std::invalid_argument )
Set the parity type for the serial port.
Parity GetParity () const throw (NotOpen)
Get the parity type for the serial port.
void SetNumOfStopBits (const StopBits numOfStopBits) throw ( NotOpen, std::invalid_argument )
Set the number of stop bits to be used with the serial port.
StopBits GetNumOfStopBits () const throw (NotOpen)
Get the number of stop bits currently being used by the serial port.
void SetFlowControl (const FlowControl flowControl) throw ( NotOpen, std::invalid_argument )
Set flow control.
FlowControl GetFlowControl () const throw ( NotOpen )
Get the current flow control setting.
bool IsDataAvailable () const throw (NotOpen)
Check if data is available at the input of the serial port.
unsigned char ReadByte (const unsigned int msTimeout=0) throw ( NotOpen, ReadTimeout, std::runtime_error )
Read a single byte from the serial port.
void Read (DataBuffer &dataBuffer, const unsigned int numOfBytes=0, const unsigned int msTimeout=0) throw ( NotOpen, ReadTimeout, std::runtime_error )
const std::string ReadLine (const unsigned int msTimeout=0, const char lineTerminator= '\n') throw ( NotOpen, ReadTimeout, std::runtime_error )
Read a line of characters from the serial port.
void WriteByte (const unsigned char dataByte) throw ( NotOpen, std::runtime_error )
Send a single byte to the serial port.
void Write (const DataBuffer &dataBuffer) throw ( NotOpen, std::runtime_error )
Write the data from the specified vector to the serial port.
void Write (const std::string &dataString) throw ( NotOpen, std::runtime_error )
Write a string to the serial port.
void SetDtr (const bool dtrState=true) throw ( NotOpen, std::runtime_error )
Set the DTR line to the specified value.
bool GetDtr () const throw ( NotOpen, std::runtime_error )
Get the status of the DTR line.
void SetRts (const bool rtsState=true) throw ( NotOpen, std::runtime_error )
Set the RTS line to the specified value.
bool GetRts () const throw ( NotOpen, std::runtime_error )
Get the status of the RTS line.
bool GetCts () const throw ( NotOpen, std::runtime_error )
bool GetDsr () const throw ( NotOpen, std::runtime_error )
Private Member Functions
SerialPort (const SerialPort &otherSerialPort)
Prevent copying of objects of this class by declaring the copy constructor private.
SerialPort & operator= (const SerialPort &otherSerialPort)
Prevent copying of objects of this class by declaring the assignment operator private.
Private Attributes
SerialPortImpl * mSerialPortImpl
Pointer to implementation class instance.
Detailed Description
Note:
- This class attaches a handler to the SIGIO signal to detect the data arriving at a serial port. However, this signal handler will also call any signal handler that is already attached to this signal. However, if other parts of the application attach a signal handler to SIGIO after constructing an instance of SIGIO, they must ensure that they call the existing signal handler. Otherwise, it may not be possible to receive any data through the serial port using this class.
:FIXME: Provide examples of the above potential problem.
Todo
- The current implementation does not check if another process has locked the serial port device and does not lock the serial port device after opening it. This has been observed to cause problems while using this library while other programs such as minicom are also accessing the same device. It will be useful to lock the serial port device when it is being used by this class.
Definition at line 50 of file SerialPort.h.
Member Typedef Documentation
typedef std::vector<unsigned char> SerialPort::DataBuffer
Read the specified number of bytes from the serial port. The method will timeout if no data is received in the specified number of milliseconds (msTimeout). If msTimeout is 0, then this method will block till all requested bytes are received. If numOfBytes is zero, then this method will keep reading data till no more data is available at the serial port. In all cases, all read data is available in dataBuffer on return from this method.
Definition at line 359 of file SerialPort.h.
Member Enumeration Documentation
enum SerialPort::BaudRate
The allowed set of baud rates.
Enumerator:
- BAUD_50
- BAUD_75
- BAUD_110
- BAUD_134
- BAUD_150
- BAUD_200
- BAUD_300
- BAUD_600
- BAUD_1200
- BAUD_1800
- BAUD_2400
- BAUD_4800
- BAUD_9600
- BAUD_19200
- BAUD_38400
- BAUD_57600
- BAUD_115200
- BAUD_230400
- BAUD_DEFAULT
Definition at line 56 of file SerialPort.h.
enum SerialPort::CharacterSize
Enumerator:
- CHAR_SIZE_5
- 5 bit characters.
- CHAR_SIZE_6
- 6 bit characters.
- CHAR_SIZE_7
- 7 bit characters.
- CHAR_SIZE_8
- 8 bit characters.
- CHAR_SIZE_DEFAULT
Definition at line 85 of file SerialPort.h.
enum SerialPort::FlowControl
Enumerator:
- FLOW_CONTROL_HARD
- FLOW_CONTROL_SOFT
- FLOW_CONTROL_NONE
- FLOW_CONTROL_DEFAULT
Definition at line 106 of file SerialPort.h.
enum SerialPort::Parity
Enumerator:
- PARITY_EVEN
- Even parity.
- PARITY_ODD
- Odd parity.
- PARITY_NONE
- No parity i.e. parity checking disabled.
- PARITY_DEFAULT
Definition at line 99 of file SerialPort.h.
enum SerialPort::StopBits
Enumerator:
- STOP_BITS_1
- STOP_BITS_2
- 1 stop bit.
- STOP_BITS_DEFAULT
- 2 stop bits.
Definition at line 93 of file SerialPort.h.
Constructor & Destructor Documentation
SerialPort::SerialPort (const std::string & serialPortName) [explicit]
Constructor for a serial port.
virtual SerialPort::~SerialPort () throw () [virtual]
Destructor.
SerialPort::SerialPort (const SerialPort & otherSerialPort) [private]
Prevent copying of objects of this class by declaring the copy constructor private. This method is never defined.
Member Function Documentation
void SerialPort::Close () throw (NotOpen)
Close the serial port. All settings of the serial port will be lost and no more I/O can be performed on the serial port.
Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
BaudRate SerialPort::GetBaudRate () const throw ( NotOpen, std::runtime_error )
Get the current baud rate for the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
CharacterSize SerialPort::GetCharSize () const throw (NotOpen)
Get the current character size for the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
bool SerialPort::GetCts () const throw ( NotOpen, std::runtime_error )
bool SerialPort::GetDsr () const throw ( NotOpen, std::runtime_error )
bool SerialPort::GetDtr () const throw ( NotOpen, std::runtime_error )
Get the status of the DTR line.
FlowControl SerialPort::GetFlowControl () const throw ( NotOpen )
Get the current flow control setting. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
StopBits SerialPort::GetNumOfStopBits () const throw (NotOpen)
Get the number of stop bits currently being used by the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
Parity SerialPort::GetParity () const throw (NotOpen)
Get the parity type for the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
bool SerialPort::GetRts () const throw ( NotOpen, std::runtime_error )
Get the status of the RTS line.
bool SerialPort::IsDataAvailable () const throw (NotOpen)
Check if data is available at the input of the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
bool SerialPort::IsOpen () const
Check if the serial port is open for I/O.
void SerialPort::Open (const BaudRate baudRate = BAUD_DEFAULT, const CharacterSize charSize = CHAR_SIZE_DEFAULT, const Parity parityType = PARITY_DEFAULT, const StopBits stopBits = STOP_BITS_DEFAULT, const FlowControl flowControl = FLOW_CONTROL_DEFAULT) throw ( AlreadyOpen, OpenFailed, UnsupportedBaudRate, std::invalid_argument )
Open the serial port with the specified settings. A serial port cannot be used till it is open.
Exceptions:
- AlreadyOpen This exception is thrown if the serial port is already open.
OpenFailed This exception is thrown if the serial port could not be opened.
std::invalid_argument This exception is thrown if an invalid parameter value is specified.
SerialPort& SerialPort::operator= (const SerialPort & otherSerialPort) [private]
Prevent copying of objects of this class by declaring the assignment operator private. This method is never defined.
void SerialPort::Read (DataBuffer & dataBuffer, const unsigned int numOfBytes = 0, const unsigned int msTimeout = 0) throw ( NotOpen, ReadTimeout, std::runtime_error )
unsigned char SerialPort::ReadByte (const unsigned int msTimeout = 0) throw ( NotOpen, ReadTimeout, std::runtime_error )
Read a single byte from the serial port. If no data is available in the specified number of milliseconds (msTimeout), then this method will throw ReadTimeout exception. If msTimeout is 0, then this method will block till data is available.
const std::string SerialPort::ReadLine (const unsigned int msTimeout = 0, const char lineTerminator = '\n') throw ( NotOpen, ReadTimeout, std::runtime_error )
Read a line of characters from the serial port.
void SerialPort::SetBaudRate (const BaudRate baudRate) throw ( UnsupportedBaudRate, NotOpen, std::invalid_argument )
Set the baud rate for the serial port to the specified value (baudRate). Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
std::invalid_argument Thrown if an invalid baud rate is specified.
void SerialPort::SetCharSize (const CharacterSize charSize) throw ( NotOpen, std::invalid_argument )
Set the character size for the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
std::invalid_argument Thrown if an invalid character size is specified.
void SerialPort::SetDtr (const bool dtrState = true) throw ( NotOpen, std::runtime_error )
Set the DTR line to the specified value.
void SerialPort::SetFlowControl (const FlowControl flowControl) throw ( NotOpen, std::invalid_argument )
Set flow control. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
std::invalid_argument Thrown if an invalid flow control is specified.
void SerialPort::SetNumOfStopBits (const StopBits numOfStopBits) throw ( NotOpen, std::invalid_argument )
Set the number of stop bits to be used with the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
std::invalid_argument Thrown if an invalid number of stop bits is specified.
void SerialPort::SetParity (const Parity parityType) throw ( NotOpen, std::invalid_argument )
Set the parity type for the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
std::invalid_argument Thrown if an invalid parity is specified.
void SerialPort::SetRts (const bool rtsState = true) throw ( NotOpen, std::runtime_error )
Set the RTS line to the specified value.
void SerialPort::Write (const std::string & dataString) throw ( NotOpen, std::runtime_error )
Write a string to the serial port.
void SerialPort::Write (const DataBuffer & dataBuffer) throw ( NotOpen, std::runtime_error )
Write the data from the specified vector to the serial port.
void SerialPort::WriteByte (const unsigned char dataByte) throw ( NotOpen, std::runtime_error )
Send a single byte to the serial port. Exceptions:
- NotOpen Thrown if this method is called while the serial port is not open.
Member Data Documentation
SerialPortImpl* SerialPort::mSerialPortImpl [private]
Pointer to implementation class instance.
Definition at line 474 of file SerialPort.h.
Author
Generated automatically by Doxygen for libserial from the source code.
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre