Rechercher une page de manuel
dahdi_cfg
Langue: en
Version: 385678 (fedora - 01/12/10)
Section: 8 (Commandes administrateur)
NAME
dahdi_cfg - configures DAHDI kernel modules from /etc/dahdi/system.confSYNOPSIS
dahdi_cfg [-c CFG_FILE] [-s] [-f] [-t] [-v [-v ... ] ]
dahdi_cfg -h
DESCRIPTION
dahdi_cfg configures DAHDI interface cards from a config file.You generally need to run it with a valid configurations in order for DAHDI modules to work properly.
It must be run to configure every DAHDI span. Normally it is run from the DAHDI init script.
OPTIONS
-c CFG_FILE
- Use an alternative configuration file instead of /etc/dahdi/system.conf
-s
- Only shutdown spans.
-f
- Always configure every channel, even if it appears not to have changed.
-t
- Test mode. Don't do anything, just report what you wanted to do.
-v
- Be more verbose. Add extra v-s for extra verbosity.
-h
- Display a brief help message.
FILES
/etc/dahdi/system.conf
- The default location for the configuration file.
SEE ALSO
dahdi_tool(8), dahdi_monitor(8), asterisk(8).AUTHOR
This manual page was written by Santiago Ruano Rinc['o]n <santiago@unicauca.edu.co> for the Debian system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre