dhcping

Langue: en

Autres versions - même langue

Version: January 27, 2002 (debian - 07/07/09)

Section: 8 (Commandes administrateur)

NAME

dhcping - send a DHCP request to DHCP server to see if it's up and running

SYNOPSIS

dhcping [-v] [-q] [-i] [-r] -t maxwait -c client-IP-address -s server-IP-address -h client-hardware-address [-g gateway-IP-address]

DESCRIPTION

This command allows the system administrator to check if a remote DHCP server is still functioning.

Options are:

-v
Verbose, print some information.
-V
Very verbose, print a lot of information.
-i
Use DHCPINFORM packets.
-r
Use DHCPREQUEST packets (default behaviour).
-q
Quiet, print nothing on the screen.
-t maxwait
Maximum time to wait for an answer from the server in seconds. Default is 3 seconds.
-c client-IP-address
Request this IP address. Note that this is also the IP address the answer will be sent to.
-s server-IP-address
Send the DHCP packet to this IP address.
-h client-hardware-address
Use this hardware-address in the DHCP request. It can be up to sixteen octets separated by colons (i.e. 01:02:03:04)
-g gateway-IP-address
Use this IP address for the gateway IP address in the DHCP packet. This option is currently broken.

RETURN VALUES

If everything goes okay, it returns 0. If there went something wrong, it returns 1.

SETUP

This program should be installed setuid root or ran by root only. See SECURITY for more information.

On your DHCP server, add these lines to the dhcpd.conf:

   host <your monitoring host FQDN> {
      hardware ethernet <your monitor host mac address>;
      fixed-address     <your monitoring host IP address>;
   }
 
 
 
Then try it:

$ dhcping -c your monitoring host IP address \
          -s your DHCP server IP address \
          -h your monitor host mac address

It will either respond with ``no answer'' or ``Got answer from: your DHCP server IP address''

The DHCP server logfile will give:
 DHCPREQUEST for 192.168.1.1 from 00:20:18:56:29:8f via ed0
 DHCPACK on 192.168.1.1 to 00:20:18:56:29:8f via ed0
 DHCPRELEASE of 192.168.1.1 from 00:20:18:56:29:8f via ed0 (found)

Running in DHCPINFORM mode with -i:

If you see ``DHCPINFORM from 192.168.1.1 via xl0: not authoritative for subnet 192.168.1.0'', you should add the authoritative statement to the subnet, See dhcpd.conf(5) for details.

When running in very verbose mode, dhcping tries to dump all data of the send and received DHCP packets. It will first dump the packet in hex-format, then decodes the header and finally the options.

HOW IT WORKS

The client either sends a DHCPREQUEST or DHCPINFORM packet to the server and waits for an answer. Then, if a DHCPREQUEST was send, it will send a DHCPRELEASE back to the server.

SECURITY

This program is installed setuid root as it requires the privileges to bind itself to port 68 (bootpc). Root privileges are dropped as soon as the program has bound itself to that port.

BUGS

Currently (this may, or may not, change in the future) the ISC DHCP daemon does not write leases with a fixed IP address in the dhcpd.leases file.

DHCPINFORM packets can only be used on subnets the server is authoritative for. If the monitoring script runs on a subnet the server isn't authoritative for, it should use the DHCPREQUEST packets. I also experienced some problems with ISC DHCPD v2 servers, but that is also in the README of it.

The -V option is still working, but shouldn't be used for debugging of the packets. Better use dhcpdump(8) for that, which is available on my website. I wanted to remove it, but decided only to do it from the documentation, not from the code. Maybe I'll need it one day for debugging.

AUTHOR

Edwin Groothuis, edwin@mavetju.org (http://www.mavetju.org)

SEE ALSO

dhcpd(8), dhclient(8), dhcpd.conf(5), dhcpdump(8)