fence_cisco_ucs

Langue: en

Version: 2009-10-20 (fedora - 01/12/10)

Section: 8 (Commandes administrateur)

NAME

fence_cisco_ucs - Fence agent for Cisco UCS

DESCRIPTION

fence_cisco_ucs is an I/O Fencing agent which can be used with Cisco UCS to fence machines. fence_cisco_ucs accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_cisco_ucs can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.cisco.com

PARAMETERS

        

-o, --action=<action>
Fencing Action (Default Value: reboot)         
-a, --ip=<ip>
IP Address or Hostname This parameter is always required.         
-l, --username=<name>
Login Name This parameter is always required.         
-p, --password=<password>
Login password or passphrase         
-S, --password-script=<script>
Script to retrieve password         
-z, --ssl
SSL connection         
-4, --inet4-only
Forces agent to use IPv4 addresses only         
-6, --inet6-only
Forces agent to use IPv6 addresses only         
-u, --ipport=<port>
TCP port to use for connection with device         
-n, --plug=<id>
Physical plug number or name of virtual machine This parameter is always required.         
-v, --verbose
Verbose mode         
-D, --debug-file=<debugfile>
Write debug information to given file         
-V, --version
Display version information and exit         
-h, --help
Display help and exit         
-C, --separator=<char>
Separator for CSV created by operation list (Default Value: ,)         
--power-wait
Wait X seconds after issuing ON/OFF (Default Value: 0)         
--power-timeout
Test X seconds for status change after ON/OFF (Default Value: 20)         
--shell-timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)         
--retry-on
Count of attempts to retry power on (Default Value: 1)         
--delay
Wait X seconds before fencing is started (Default Value: 0)

ACTIONS

        

on
Power on machine.         
off
Power off machine.         
reboot
Reboot machine.         
status
This returns the status of the plug/virtual machine.         
list
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.         
monitor
Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).         
metadata

 The operational behavior of this is not known.

STDIN PARAMETERS

        

action
Fencing Action (Default Value: reboot)         
ipaddr
IP Address or Hostname This parameter is always required.         
login
Login Name This parameter is always required.         
passwd
Login password or passphrase         
passwd_script
Script to retrieve password         
ssl
SSL connection         
inet4_only
Forces agent to use IPv4 addresses only         
inet6_only
Forces agent to use IPv6 addresses only         
ipport
TCP port to use for connection with device         
port
Physical plug number or name of virtual machine This parameter is always required.         
verbose
Verbose mode         
debug
Write debug information to given file         
version
Display version information and exit         
help
Display help and exit         
separator
Separator for CSV created by operation list (Default Value: ,)         
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)         
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)         
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)         
retry_on
Count of attempts to retry power on (Default Value: 1)         
delay
Wait X seconds before fencing is started (Default Value: 0)