Rechercher une page de manuel
fence_rsa
Langue: en
Version: 2009-10-20 (fedora - 01/12/10)
Section: 8 (Commandes administrateur)
NAME
fence_rsa - Fence agent for IBM RSADESCRIPTION
fence_rsa is an I/O Fencing agent which can be used with the IBM RSA II management interface. It logs into an RSA II device via telnet and reboots the associated machine. Lengthy telnet connections to the RSA II device should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. fence_rsa accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_rsa can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.Vendor URL: http://www.ibm.com
PARAMETERS
- -o, --action=<action>
- Fencing Action (Default Value: reboot)
- -a, --ip=<ip>
- IP Address or Hostname This parameter is always required.
- -l, --username=<name>
- Login Name This parameter is always required.
- -p, --password=<password>
- Login password or passphrase
- -S, --password-script=<script>
- Script to retrieve password
- -c, --command-prompt=<prompt>
- Force command prompt (Default Value: >)
- -x, --ssh
- SSH connection
- -k, --identity-file=<filename>
- Identity file for ssh
- -u, --ipport=<port>
- TCP port to use for connection with device
- -v, --verbose
- Verbose mode
- -D, --debug-file=<debugfile>
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --power-timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --shell-timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --login-timeout
- Wait X seconds for cmd prompt after login (Default Value: 10)
- --power-wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --retry-on
- Count of attempts to retry power on (Default Value: 1)
- --delay
- Wait X seconds before fencing is started (Default Value: 0)
ACTIONS
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- monitor
- Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
- metadata
The operational behavior of this is not known.
STDIN PARAMETERS
- action
- Fencing Action (Default Value: reboot)
- ipaddr
- IP Address or Hostname This parameter is always required.
- login
- Login Name This parameter is always required.
- passwd
- Login password or passphrase
- passwd_script
- Script to retrieve password
- cmd_prompt
- Force command prompt (Default Value: >)
- secure
- SSH connection
- identity_file
- Identity file for ssh
- ipport
- TCP port to use for connection with device
- verbose
- Verbose mode
- debug
- Write debug information to given file
- version
- Display version information and exit
- help
- Display help and exit
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 10)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- delay
- Wait X seconds before fencing is started (Default Value: 0)
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre