Rechercher une page de manuel
pxfw
Langue: en
Version: 02 April, 2009 (ubuntu - 25/10/10)
Section: 8 (Commandes administrateur)
NAME
pxfw - Firmware flashing tool for Plextor CD/DVD devicesSYNOPSIS
pxfw -lpxfw -d DEVICE [-if firmware.bin] [-u] [-f] [-v]
pxfw -d DEVICE [-e] [-r] [-t] [-v]
DESCRIPTION
pxfw is the linux firmware flasher for Plextor CD and DVD drives. Remove any disks before flashing.FEATURES
You can flash the firmware of these drives:Plextor Premium, Premium-2, PX-712, PX-716, PX-755 and PX-760.
DEVICE
can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.Linux:
/dev/hdX: IDE device
/dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation
/dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device
OpenBSD/NetBSD:
/dev/rcdX
FreeBSD:
/dev/cd: SCSI device
/dev/acd: ATA device
MacOS X:
/dev/disk:
win32:
C:,D:,E:, ... X:,Y:,Z:
OPTIONS
-l scan busses for all available CD and DVD devices
-if select inputfile. Specify the firmware binary file, which should
be written to DEVICE.
-u proceed update. When the firmware checksum test has succeeded,
write firmware to DEVICE.
-f force flashing. Even if DEVICE is not recognized, or firmware.
checksum has failed, firmware writing will be forced.
Handle with care.
-e read EEPROM from DEVICE.
-r reboot the device.
-t test which opcodes are supported by the device.
-v debug.
EXAMPLES
pxfw -d /dev/hdc -if 755_1.07.bin -uwrites firmware file 755_1.07.bin into Master Drive on Secondary IDE-Port.
pxfw -d /dev/sr3 -e -oe file.foo
reades EEPROM from device /dev/sr3 and writes it to file.foo. please report man page improvements to T.Maguin@web.de
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre