Rechercher une page de manuel
rescan-scsi-bus.sh
Langue: en
Version: March 1998 (debian - 07/07/09)
Section: 8 (Commandes administrateur)
NAME
rescan-scsi-bus.sh - rescan the SCSI bus.SYNOPSIS
rescan-scsi-bus.sh [ -l ] [ -w ] [ -c ] [ -r ] [ host... ]DESCRIPTION
rescan-scsi-bus.sh is a program that is used to rescan the SCSI bus using the SCSI add-single-device feature of the Linux SCSI layer.OPTIONS
- -l
- Activates scanning for LUNs 0 .. 7 (default: 0).
- -L NUM
- Activates scanning for LUNs 0 .. LUN (default: 0).
- --luns=LIST
- Scan only LUNs in LIST.
- -w
- Enables scanning for device IDs 0 .. 15 (default: 0 .. 7).
- --ids=LIST
- Scan only device IDs in LIST.
- -i, --issue-lip
- Issue a FibreChannel LIP reset (default: disabled).
- -r, --remove
- Enables removing of devices (default: disabled).
- --forceremove
- Remove and readd every device (dangerous).
- -c
- Enables scanning of channels 0 1 (default: 0).
- --channels=LIST
- Scan only channels in LIST.
- host, --hosts=LIST
- If host adapters are given, only these are scanned (default: all).
- --nooptscan
- Don't stop looking for LUNs if 0 is not found.
- --color
- Use coloured prefixes OLD/NEW/DEL.
LIST is a comma separated list of single values and ranges (no spaces allowed), e.g. 0,2-3,8,10-15.
AUTHOR
rescan-scsi-bus.sh was written by Kurt Garloff <garloff@suse.de>.COPYRIGHT
This program is free software. You can use it under the terms of the GNU GPL (General Public License) Version 2 (or any later version, at your option). Note, that the GNU GPL implies, that there is NO WARRANTY at all. Full text of the GPL can be found in /usr/share/common-licenses/GPL file.AVAILABILITY
rescan-scsi-bus.sh is available fromhttp://www.garloff.de/kurt/linux/scsidev/
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre