Rechercher une page de manuel
safenet
Langue: en
Version: 66380 (mandriva - 22/10/07)
Section: 8 (Commandes administrateur)
Sommaire
NAME
safenet - Driver for SafeNet compatible UPS equipmentNOTE
This man page only documents the hardware-specific features of the safenet driver. For information about the core driver, see nutupsdrv(8).SUPPORTED HARDWARE
This driver supports UPS equipment which can be controlled via SafeNet v1.0 for Windows (serial interface only).EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):- manufacturer=value
- Autodetection of this parameter is not possible yet (and it probably never will be). Therefor this user defined string accepts any name. The default is unknown.
- modelname=value
- Like manufacturer above. The default is unknown.
- serialnumber=value
- Like manufacturer above. The default is unknown.
UPSCMD
test.battery.start - Start UPS self test
test.battery.stop - Cancel UPS self test
test.failure.start - Start simulated power failure
test.failure.stop - Cancel simulated power failure
beeper.on - Enable UPS beeper
beeper.off - Disable UPS beeper
shutdown.return - Shut down in 1 second and wait for power to return
shutdown.reboot - Shut down in 1 seconds and reboot after 1 minute
shutdown.reboot.graceful - Shut down in 20 seconds and reboot after 1 minute
AUTHOR
Arjen de Korte <arjen@de-korte.org>SEE ALSO
The core driver:
nutupsdrv(8)Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre