Rechercher une page de manuel
sg_get_lba_status
Langue: en
Version: 364577 (ubuntu - 25/10/10)
Section: 8 (Commandes administrateur)
NAME
sg_get_lba_status - send the SCSI GET LBA STATUS commandSYNOPSIS
sg_get_lba_status [--brief] [--help] [--hex] [--lba=LBA] [--maxlen=LEN] [--raw] [--verbose] [--version] DEVICEDESCRIPTION
Send the SCSI GET LBA STATUS command to the DEVICE and outputs the response. This command was introduced in (draft) SBC-3 revision 20 and devices that support thin provisioning should support this command.
The default action is to decode the response into one LBA status descriptor per line output to stdout. The descriptor LBA is output in hex (prefixed by '0x') and the number of blocks is output in decimal followed by the provisioning status in decimal. The provisioning status can be in the range 0 to 15 of which only 0 (mapped), 1 (unmapped) and 2 (anchored) are used currently. The amount of output can be reduced by the --brief option.
OPTIONS
Arguments to long options are mandatory for short options as well.- -b, --brief
- when use once then one LBA status descriptor per line is output to stdout. Each line has this format: "0x<descriptor_LBA> 0x<blocks> <provisioning_status>". So the descriptor LBA and blocks are output in hex and the provisioning status in decimal. When used twice (e.g. '-bb' or '--brief --brief') the the provisioning status of the given LBA (or LBA 0 if the --lba option is not given) is output to stdout. A check is made that the given LBA lies on the range of the first returned LBA status descriptor (as it should according to SBC-3 revision 20) and warnings are sent to stderr if it doesn't.
- -h, --help
- output the usage message then exit.
- -H, --hex
- output response to this command in ASCII hex.
- -l, --lba=LBA
- where LBA is the starting Logical Block Address (LBA) to check the provisioning status for. Note that the DEVICE chooses how many following blocks that it will return provisioning status for.
- -m, --maxlen=LEN
- where LEN is the (maximum) response length in bytes. It is placed in the cdb's "allocation length" field. If not given then 24 is used. 24 is enough space for the response header and one LBA status descriptor. LEN should be 8 plus a multiple of 16 (e.g. 24, 40, and 56 are suitable).
- -r, --raw
- output response in binary (to stdout).
- -v, --verbose
- increase the level of verbosity, (i.e. debug output). Additional output caused by this option is sent to stderr.
- -V, --version
- print the version string and then exit.
NOTES
For a discussion of thin provisioning see section 4.6.3 of sbcr22.pdf at http://www.t10.org (or the corresponding section of a later draft).EXIT STATUS
The exit status of sg_get_lba_status is 0 when it is successful. Otherwise see the sg3_utils(8) man page.AUTHORS
Written by Douglas Gilbert.REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.COPYRIGHT
Copyright © 2009-2010 Douglas GilbertThis software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SEE ALSO
sg_write_same(8), sg_unmap(8)Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre