Rechercher une page de manuel
tgt-admin
Langue: en
Version: 03/31/2010 (ubuntu - 25/10/10)
Section: 8 (Commandes administrateur)
NAME
tgt-admin - Linux SCSI Target Configuration ToolSYNOPSIS
- tgtadm [-e --execute] [--delete <value>] [--offline <value>] [--ready <value>] [-s --show] [-c --conf <file>] [--ignore-errors] [-f --force] [-p --pretend] [--dump] [-v --verbose] [-h --help]
DESCRIPTION
- tgt-admin is a utility which allows a persistent configuration of targets and luns. It uses tgtadm commands to create, delete and show targets.
OPTIONS
-e, --execute
- Read /etc/tgt/targets.conf and execute tgtadm commands. If the target already exists, it won't be processed. See --update.
-d, --delete <value>
- Delete all or selected targets. The target will be deleted only if it's not used (no initiator is connected to it).
If you want to delete targets which are in use, you have to add the "--force" flag. -
-
Example usage: --delete ALL - delete all targets --delete tid=4 - delete target 4 (target with tid 4) --delete iqn.2008-08.com.example:some.target - delete this target
-
--offline
- Put all or selected targets in offline state.
-
-
Example usage: --offline ALL - offline all targets --offline tid=4 - offline target 4 (target with tid 4) --offline iqn.2008-08.com.example:some.target - offline this target
-
--ready
- Put all or selected targets in ready state.
-
-
Example usage: --ready ALL - ready all targets --ready tid=4 - ready target 4 (target with tid 4) --ready iqn.2008-08.com.example:some.target - ready this target
-
--update <value>
- Update all or selected targets. The target will be updated only if it's not used (no initiator is connected to it).
If you want to update targets which are in use, you have to add "--force" flag. -
-
Example usage: --update ALL - ready all targets --update tid=4 - ready target 4 (target with tid 4) --update iqn.2008-08.com.example:some.target - update this target
-
-s, --show
- Show all the targets.
-c, --conf <configuration file>
- Specify an alternative configuration file instead of /etc/tgt/target.conf, which is the default.
--ignore-errors
- Continue even if tgtadm exits with non-zero code.
-f, --force
- Force some operations even if the target is in use.
-p, --pretend
- Only print tgtadm options which would be used; don't execute any actions. Assumes -v.
--dump
- Dump current tgtd configuration. Note: does not include detailed parameters, like write caching.
-v, --verbose
- Increase verbosity (show tgtadm commands used).
-h, --help
- Display a list of available options and exit.
CONFIGURATION FILE SYNTAX
The defualt configuration file is /etc/tgt/target.conf. It defines all the targets and their properties. The configuration file is in XML format and uses tags. Configuration file contains several target blocks, where each block contains target's properties such as storage devices, initator ACL and authorization information. You can include other config files using: include /etc/tgt/xen/*.conf.
backing-store
- Defines a virtual device on the target.
direct-store
- Defines a direct mapped device with the same properties as the physical device (such as VENDOR_ID, SERIAL_NUM, etc.)
initiator-address
- Allows connections only from the specified IP address. Defaults to ALL if no "initiator-address" is specified.
incominguser
- Define iscsi incoming authentication setting. If no "incominguser" is specified, it is not used.
outgoinguser
- Define iscsi outgoing authentication setting. If no "outgoinguser" is specified, it is not used.
-
-
Example configuration file: <target iqn.2007-04.com.example:san.monitoring> backing-store /dev/san/monitoring # if no "incominguser" is specified, it is not used incominguser backup secretpass12 # defaults to ALL if no "initiator-address" is specified initiator-address 192.168.1.2 </target> <target iqn.2007-02.com.example:san.xen1> backing-store /dev/san/xen1-disk1 # LUN1 direct-store /dev/san/xen1-disk2 # LUN2 initiator-address 192.168.1.2 # Allowed IP initiator-address 192.168.5.6 # Allowed IP incominguser user1 secretpass12 incominguser user2 secretpass23 outgoinguser userA secretpassA </target> <target iqn.2007-02.com.example:san.xen2> backing-store /dev/san/xen2 </target> <target iqn.2007-06.com.example:san.vmware1> backing-store /dev/san/vmware1 </target>
-
FILES
/etc/tgt/targets.conf
- Configuration file for tgt-admin.
/usr/share/doc/tgt/targets.conf.example
- Example configuration file for tgt-admin.
SEE ALSO
tgtd(8), tgtadm(8), tgtimg(8), tgt-setup-lun(8). http://stgt.sourceforge.net/
REPORTING BUGS
Report bugs to <stgt@vger.kernel.org>
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre