Rechercher une page de manuel
ccw_device_start
Langue: en
Version: June 2009 (debian - 07/07/09)
Section: 9 (Appels noyau Linux)
NAME
ccw_device_start - start a s390 channel programSYNOPSIS
- int ccw_device_start(struct ccw_device * cdev, struct ccw1 * cpa, unsigned long intparm, __u8 lpm, unsigned long flags);
ARGUMENTS
cdev
- target ccw device
cpa
- logical start address of channel program
intparm
- user specific interruption parameter; will be presented back to cdev's interrupt handler. Allows a device driver to associate the interrupt with a particular I/O request.
lpm
- defines the channel path to be used for a specific I/O request. A value of 0 will make cio use the opm.
flags
- additional flags; defines the action to be performed for I/O processing.
DESCRIPTION
Start a S/390 channel program. When the interrupt arrives, the IRQ handler is called, either immediately, delayed (dev-end missing, or sense required) or never (no IRQ handler registered).
RETURNS
0, if the operation was successful; -EBUSY, if the device is busy, or status pending; -EACCES, if no path specified in lpm is operational; -ENODEV, if the device is not operational.
CONTEXT
Interrupts disabled, ccw device lock held
AUTHOR
Cornelia Huck <cornelia.huck@de.ibm.com>
- Author.
COPYRIGHT
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre