Linux Certif

Toute la documentation sur la certification Linux LPI

struct_i2c_driver

NAME

struct_i2c_driver - represent an I2C device driver

SYNOPSIS

 struct i2c_driver {
   unsigned int class;
   int (* attach_adapter) (struct i2c_adapter *);
   int (* detach_adapter) (struct i2c_adapter *);
   int (* probe) (struct i2c_client *, const struct i2c_device_id *);
   int (* remove) (struct i2c_client *);
   void (* shutdown) (struct i2c_client *);
   int (* suspend) (struct i2c_client *, pm_message_t mesg);
   int (* resume) (struct i2c_client *);
   int (* command) (struct i2c_client *client, unsigned int cmd, void *arg);
   struct device_driver driver;
   const struct i2c_device_id * id_table;
   int (* detect) (struct i2c_client *, struct i2c_board_info *);
   const unsigned short * address_list;
   struct list_head clients;
 };  
 

MEMBERS

class

What kind of i2c device we instantiate (for detect)

attach_adapter

Callback for bus addition (for legacy drivers)

detach_adapter

Callback for bus removal (for legacy drivers)

probe

Callback for device binding

remove

Callback for device unbinding

shutdown

Callback for device shutdown

suspend

Callback for device suspend

resume

Callback for device resume

command

Callback for bus-wide signaling (optional)

driver

Device driver model driver

id_table

List of I2C devices supported by this driver

detect

Callback for device detection

address_list

The I2C addresses to probe (for detect)

clients

List of detected clients we created (for i2c-core use only)

DESCRIPTION

The driver.owner field should be set to the module owner of this driver. The driver.name field should be set to the name of this driver.

For automatic device detection, both detect and address_data must be defined. class should also be set, otherwise only devices forced with module parameters will be created. The detect function must fill at least the name field of the i2c_board_info structure it is handed upon successful detection, and possibly also the flags field.

If detect is missing, the driver will still work fine for enumerated devices. Detected devices simply won't be supported. This is expected for the many I2C/SMBus devices which can't be detected reliably, and the ones which can always be enumerated in practice.

The i2c_client structure which is handed to the detect callback is not a real i2c_client. It is initialized just enough so that you can call i2c_smbus_read_byte_data and friends on it. Don't do anything else with it. In particular, calling dev_dbg and friends on it is not allowed.

COPYRIGHT