Rechercher une page de manuel
struct_usb_device
Langue: en
Version: October 2010 (fedora - 01/12/10)
Section: 9 (Appels noyau Linux)
NAME
struct_usb_device - kernel's representation of a USB deviceSYNOPSIS
struct usb_device { int devnum; char devpath[16]; u32 route; enum usb_device_state state; enum usb_device_speed speed; struct usb_tt * tt; int ttport; unsigned int toggle[2]; struct usb_device * parent; struct usb_bus * bus; struct usb_host_endpoint ep0; struct device dev; struct usb_device_descriptor descriptor; struct usb_host_config * config; struct usb_host_config * actconfig; struct usb_host_endpoint * ep_in[16]; struct usb_host_endpoint * ep_out[16]; char ** rawdescriptors; unsigned short bus_mA; u8 portnum; u8 level; unsigned can_submit:1; unsigned persist_enabled:1; unsigned have_langid:1; unsigned authorized:1; unsigned authenticated:1; unsigned wusb:1; int string_langid; char * product; char * manufacturer; char * serial; struct list_head filelist; #ifdef CONFIG_USB_DEVICE_CLASS struct device * usb_classdev; #endif #ifdef CONFIG_USB_DEVICEFS struct dentry * usbfs_dentry; #endif int maxchild; struct usb_device * children[USB_MAXCHILDREN]; u32 quirks; atomic_t urbnum; unsigned long active_duration; #ifdef CONFIG_PM unsigned long last_busy; int autosuspend_delay; unsigned long connect_time; unsigned do_remote_wakeup:1; unsigned reset_resume:1; #endif struct wusb_dev * wusb_dev; int slot_id; };
MEMBERS
devnum
- device number; address on a USB bus
devpath[16]
- device ID string for use in messages (e.g., /port/...)
route
- tree topology hex string for use with xHCI
state
- device state: configured, not attached, etc.
speed
- device speed: high/full/low (or error)
tt
- Transaction Translator info; used with low/full speed dev, highspeed hub
ttport
- device port on that tt hub
toggle[2]
- one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints
parent
- our hub, unless we're the root
bus
- bus we're part of
ep0
- endpoint 0 data (default control pipe)
dev
- generic device interface
descriptor
- USB device descriptor
config
- all of the device's configs
actconfig
- the active configuration
ep_in[16]
- array of IN endpoints
ep_out[16]
- array of OUT endpoints
rawdescriptors
- raw descriptors for each config
bus_mA
- Current available from the bus
portnum
- parent port number (origin 1)
level
- number of USB hub ancestors
can_submit
- URBs may be submitted
persist_enabled
- USB_PERSIST enabled for this device
have_langid
- whether string_langid is valid
authorized
- policy has said we can use it; (user space) policy determines if we authorize this device to be used or not. By default, wired USB devices are authorized. WUSB devices are not, until we authorize them from user space. FIXME -- complete doc
authenticated
- Crypto authentication passed
wusb
- device is Wireless USB
string_langid
- language ID for strings
product
- iProduct string, if present (static)
manufacturer
- iManufacturer string, if present (static)
serial
- iSerialNumber string, if present (static)
filelist
- usbfs files that are open to this device
usb_classdev
- USB class device that was created for usbfs device access from userspace
usbfs_dentry
- usbfs dentry entry for the device
maxchild
- number of ports if hub
children[USB_MAXCHILDREN]
- child devices - USB devices that are attached to this hub
quirks
- quirks of the whole device
urbnum
- number of URBs submitted for the whole device
active_duration
- total time device is not suspended
last_busy
- time of last use
autosuspend_delay
- in jiffies
connect_time
- time device was first connected
do_remote_wakeup
- remote wakeup should be enabled
reset_resume
- needs reset instead of resume
wusb_dev
- if this is a Wireless USB device, link to the WUSB specific data for the device.
slot_id
- Slot ID assigned by xHCI
NOTES
Usbcore drivers should not set usbdev->state directly. Instead use usb_set_device_state.
COPYRIGHT
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre