Rechercher une page de manuel
git-log
Langue: en
Version: 02/25/2008 (mandriva - 01/05/08)
Section: 1 (Commandes utilisateur)
Sommaire
NAME
git-log - Show commit logsSYNOPSIS
git-log <option>...DESCRIPTION
Shows the commit logs.The command takes options applicable to the git-rev-list(1) command to control what is shown and how, and options applicable to the git-diff-tree(1) commands to control how the changes each commit introduces are shown.
OPTIONS
-p
- Generate patch (see section on generating patches).
-u
- Synonym for "-p".
-U<n>
- Shorthand for "--unified=<n>".
--unified=<n>
- Generate diffs with <n> lines of context instead of the usual three. Implies "-p".
--raw
- Generate the raw format.
--patch-with-raw
- Synonym for "-p --raw".
--stat[=width[,name-width]]
- Generate a diffstat. You can override the default output width for 80-column terminal by "--stat=width". The width of the filename part can be controlled by giving another width to it separated by a comma.
--numstat
- Similar to --stat, but shows number of added and deleted lines in decimal notation and pathname without abbreviation, to make it more machine friendly. For binary files, outputs two - instead of saying 0 0.
--shortstat
- Output only the last line of the --stat format containing total number of modified files, as well as number of added and deleted lines.
--summary
- Output a condensed summary of extended header information such as creations, renames and mode changes.
--patch-with-stat
- Synonym for "-p --stat".
-z
- NUL-line termination on output. This affects the --raw output field terminator. Also output from commands such as "git-log" will be delimited with NUL between commits.
--name-only
- Show only names of changed files.
--name-status
- Show only names and status of changed files.
--color
- Show colored diff.
--no-color
- Turn off colored diff, even when the configuration file gives the default to color output.
--color-words
- Show colored word diff, i.e. color words which have changed.
--no-renames
- Turn off rename detection, even when the configuration file gives the default to do so.
--check
- Warn if changes introduce trailing whitespace or an indent that uses a space before a tab. Exits with non-zero status if problems are found. Not compatible with --exit-code.
--full-index
- Instead of the first handful characters, show full object name of pre- and post-image blob on the "index" line when generating a patch format output.
--binary
- In addition to --full-index, output "binary diff" that can be applied with "git apply".
--abbrev[=<n>]
- Instead of showing the full 40-byte hexadecimal object name in diff-raw format output and diff-tree header lines, show only handful hexdigits prefix. This is independent of --full-index option above, which controls the diff-patch output format. Non default number of digits can be specified with --abbrev=<n>.
-B
- Break complete rewrite changes into pairs of delete and create.
-M
- Detect renames.
-C
- Detect copies as well as renames. See also --find-copies-harder.
--diff-filter=[ACDMRTUXB*]
- Select only files that are Added (A), Copied (C), Deleted (D), Modified (M), Renamed (R), have their type (mode) changed (T), are Unmerged (U), are Unknown (X), or have had their pairing Broken (B). Any combination of the filter characters may be used. When * (All-or-none) is added to the combination, all paths are selected if there is any file that matches other criteria in the comparison; if there is no file that matches other criteria, nothing is selected.
--find-copies-harder
- For performance reasons, by default, -C option finds copies only if the original file of the copy was modified in the same changeset. This flag makes the command inspect unmodified files as candidates for the source of copy. This is a very expensive operation for large projects, so use it with caution. Giving more than one -C option has the same effect.
-l<num>
- -M and -C options require O(n^2) processing time where n is the number of potential rename/copy targets. This option prevents rename/copy detection from running if the number of rename/copy targets exceeds the specified number.
-S<string>
- Look for differences that contain the change in <string>.
--pickaxe-all
- When -S finds a change, show all the changes in that changeset, not just the files that contain the change in <string>.
--pickaxe-regex
- Make the <string> not a plain string but an extended POSIX regex to match.
-O<orderfile>
- Output the patch in the order specified in the <orderfile>, which has one shell glob pattern per line.
-R
- Swap two inputs; that is, show differences from index or on-disk file to tree contents.
--text
- Treat all files as text.
-a
- Shorthand for "--text".
--ignore-space-at-eol
- Ignore changes in whitespace at EOL.
--ignore-space-change
- Ignore changes in amount of whitespace. This ignores whitespace at line end, and considers all other sequences of one or more whitespace characters to be equivalent.
-b
- Shorthand for "--ignore-space-change".
--ignore-all-space
- Ignore whitespace when comparing lines. This ignores differences even if one line has whitespace where the other line has none.
-w
- Shorthand for "--ignore-all-space".
--exit-code
- Make the program exit with codes similar to diff(1). That is, it exits with 1 if there were differences and 0 means no differences.
--quiet
- Disable all output of the program. Implies --exit-code.
--ext-diff
- Allow an external diff helper to be executed. If you set an external diff driver with gitattributes(5), you need to use this option with git-log(1) and friends.
--no-ext-diff
- Disallow external diff drivers.
--src-prefix=<prefix>
- Show the given source prefix instead of "a/".
--dst-prefix=<prefix>
- Show the given destination prefix instead of "b/".
--no-prefix
- Do not show any source or destination prefix.
-<n>
- Limits the number of commits to show.
<since>..<until>
- Show only commits between the named two commits. When either <since> or <until> is omitted, it defaults to HEAD, i.e. the tip of the current branch. For a more complete list of ways to spell <since> and <until>, see "SPECIFYING REVISIONS" section in git-rev-parse(1).
--decorate
- Print out the ref names of any commits that are shown.
--full-diff
- Without this flag, "git log -p <paths>..." shows commits that touch the specified paths, and diffs about the same specified paths. With this, the full diff is shown for commits that touch the specified paths; this means that "<paths>..." limits only commits, and doesn't limit diff for those commits.
--follow
- Continue listing the history of a file beyond renames.
--log-size
- Before the log message print out its size in bytes. Intended mainly for porcelain tools consumption. If git is unable to produce a valid value size is set to zero. Note that only message is considered, if also a diff is shown its size is not included.
<paths>...
- Show only commits that affect the specified paths.
Commit Formatting
--pretty[=<format>]
- Pretty-print the contents of the commit logs in a given format, where <format> can be one of oneline, short, medium, full, fuller, email, raw and format:<string>. When omitted, the format defaults to medium.
--abbrev-commit
- Instead of showing the full 40-byte hexadecimal commit object name, show only handful hexdigits prefix. Non default number of digits can be specified with "--abbrev=<n>" (which also modifies diff output, if it is displayed).
This should make "--pretty=oneline" a whole lot more readable for people using 80-column terminals.
--encoding[=<encoding>]
- The commit objects record the encoding used for the log message in their encoding header; this option can be used to tell the command to re-code the commit log message in the encoding preferred by the user. For non plumbing commands this defaults to UTF-8.
--relative-date
- Synonym for --date=relative.
--date={relative,local,default,iso,rfc}
- Only takes effect for dates shown in human-readable format, such as when using "--pretty".
--date=relative shows dates relative to the current time, e.g. "2 hours ago".
--date=local shows timestamps in user's local timezone.
--date=iso (or --date=iso8601) shows timestamps in ISO 8601 format.
--date=rfc (or --date=rfc2822) shows timestamps in RFC 2822 format, often found in E-mail messages.
--date=short shows only date but not time, in YYYY-MM-DD format.
--date=default shows timestamps in the original timezone (either committer's or author's).
--header
- Print the contents of the commit in raw-format; each record is separated with a NUL character.
--parents
- Print the parents of the commit.
--timestamp
- Print the raw commit timestamp.
--left-right
- Mark which side of a symmetric diff a commit is reachable from. Commits from the left side are prefixed with < and those from the right with >. If combined with --boundary, those commits are prefixed with -.
For example, if you have this topology:
-
-
.ft C y---b---b branch B / \ / / . / / \ o---x---a---a branch A .ft
-
.ft C $ git rev-list --left-right --boundary --pretty=oneline A...B >bbbbbbb... 3rd on b >bbbbbbb... 2nd on b <aaaaaaa... 3rd on a <aaaaaaa... 2nd on a -yyyyyyy... 1st on b -xxxxxxx... 1st on a .ft
-
Diff Formatting
Below are listed options that control the formatting of diff output. Some of them are specific to git-rev-list(1), however other diff options may be given. See git-diff-files(1) for more options.-c
- This flag changes the way a merge commit is displayed. It shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the result one at a time. Furthermore, it lists only files which were modified from all parents.
--cc
- This flag implies the -c options and further compresses the patch output by omitting hunks that show differences from only one parent, or show the same change from all but one parent for an Octopus merge.
-r
- Show recursive diffs.
-t
- Show the tree objects in the diff output. This implies -r.
Commit Limiting
Besides specifying a range of commits that should be listed using the special notations explained in the description, additional commit limiting may be applied.-n number, --max-count=number
- Limit the number of commits output.
--skip=number
- Skip number commits before starting to show the commit output.
--since=date, --after=date
- Show commits more recent than a specific date.
--until=date, --before=date
- Show commits older than a specific date.
--max-age=timestamp, --min-age=timestamp
- Limit the commits output to specified time range.
--author=pattern, --committer=pattern
- Limit the commits output to ones with author/committer header lines that match the specified pattern (regular expression).
--grep=pattern
- Limit the commits output to ones with log message that matches the specified pattern (regular expression).
-i, --regexp-ignore-case
- Match the regexp limiting patterns without regard to letters case.
-E, --extended-regexp
- Consider the limiting patterns to be extended regular expressions instead of the default basic regular expressions.
--remove-empty
- Stop when a given path disappears from the tree.
--full-history
- Show also parts of history irrelevant to current state of a given path. This turns off history simplification, which removed merges which didn't change anything at all at some child. It will still actually simplify away merges that didn't change anything at all into either child.
--no-merges
- Do not print commits with more than one parent.
--first-parent
- Follow only the first parent commit upon seeing a merge commit. This option can give a better overview when viewing the evolution of a particular topic branch, because merges into a topic branch tend to be only about adjusting to updated upstream from time to time, and this option allows you to ignore the individual commits brought in to your history by such a merge.
--not
- Reverses the meaning of the ^ prefix (or lack thereof) for all following revision specifiers, up to the next --not.
--all
- Pretend as if all the refs in $GIT_DIR/refs/ are listed on the command line as <commit>.
--stdin
- In addition to the <commit> listed on the command line, read them from the standard input.
--quiet
- Don't print anything to standard output. This form is primarily meant to allow the caller to test the exit status to see if a range of objects is fully connected (or not). It is faster than redirecting stdout to /dev/null as the output does not have to be formatted.
--cherry-pick
- Omit any commit that introduces the same change as another commit on the "other side" when the set of commits are limited with symmetric difference. For example, if you have two branches, A and B, a usual way to list all commits on only one side of them is with --left-right, like the example above in the description of that option. It however shows the commits that were cherry-picked from the other branch (for example, "3rd on b" may be cherry-picked from branch A). With this option, such pairs of commits are excluded from the output.
-g, --walk-reflogs
- Instead of walking the commit ancestry chain, walk reflog entries from the most recent one to older ones. When this option is used you cannot specify commits to exclude (that is, ^commit, commit1..commit2, nor commit1...commit2 notations cannot be used). With --pretty format other than oneline (for obvious reasons), this causes the output to have two extra lines of information taken from the reflog. By default, commit@{Nth} notation is used in the output. When the starting commit is specified as instead. Under --pretty=oneline, the commit message is prefixed with this information on the same line.
Cannot be combined with --reverse. See also git-reflog(1).
--merge
- After a failed merge, show refs that touch files having a conflict and don't exist on all heads to merge.
--boundary
- Output uninteresting commits at the boundary, which are usually not shown.
--dense, --sparse
- When optional paths are given, the default behaviour (--dense) is to only output commits that changes at least one of them, and also ignore merges that do not touch the given paths.
Use the --sparse flag to makes the command output all eligible commits (still subject to count and age limitation), but apply merge simplification nevertheless.
Commit Ordering
By default, the commits are shown in reverse chronological order.--topo-order
- This option makes them appear in topological order (i.e. descendant commits are shown before their parents).
--date-order
- This option is similar to --topo-order in the sense that no parent comes before all of its children, but otherwise things are still ordered in the commit timestamp order.
--reverse
- Output the commits in reverse order. Cannot be combined with --walk-reflogs.
Object Traversal
These options are mostly targeted for packing of git repositories.--objects
- Print the object IDs of any object referenced by the listed commits. --objects foo ^bar thus means "send me all object IDs which I need to download if I have the commit object bar, but not foo".
--objects-edge
- Similar to --objects, but also print the IDs of excluded commits prefixed with a "-" character. This is used by git-pack-objects(1) to build "thin" pack, which records objects in deltified form based on objects contained in these excluded commits to reduce network traffic.
--unpacked
- Only useful with --objects; print the object IDs that are not in packs.
--no-walk
- Only show the given revs, but do not traverse their ancestors.
--do-walk
- Overrides a previous --no-walk.
PRETTY FORMATS
If the commit is a merge, and if the pretty-format is not oneline, email or raw, an additional line is inserted before the Author: line. This line begins with "Merge: " and the sha1s of ancestral commits are printed, separated by spaces. Note that the listed commits may not necessarily be the list of the direct parent commits if you have limited your view of history: for example, if you are only interested in changes related to a certain directory or file.Here are some additional details for each format:
- •oneline
-
-
<sha1> <title line>
-
- •short
-
-
commit <sha1> Author: <author>
-
<title line>
-
- •medium
-
-
commit <sha1> Author: <author> Date: <date>
-
<title line>
-
<full commit message>
-
- •full
-
-
commit <sha1> Author: <author> Commit: <committer>
-
<title line>
-
<full commit message>
-
- •fuller
-
-
commit <sha1> Author: <author> AuthorDate: <date & time> Commit: <committer> CommitDate: <date & time>
-
<title line>
-
<full commit message>
-
- •email
-
-
From <sha1> <date> From: <author> Date: <date & time> Subject: [PATCH] <title line>
-
<full commit message>
-
- •raw
The raw format shows the entire commit exactly as stored in the commit object. Notably, the SHA1s are displayed in full, regardless of whether --abbrev or --no-abbrev are used, and parents information show the true parent commits, without taking grafts nor history simplification into account.
- •format:
The format: format allows you to specify which information you want to show. It works a little bit like printf format, with the notable exception that you get a newline with %n instead of \n.
E.g, format:"The author of %h was %an, %ar%nThe title was >>%s<<%n" would show something like this:
-
-
.ft C The author of fe6e0ee was Junio C Hamano, 23 hours ago The title was >>t4119: test autocomputing -p<n> for traditional diff input.<< .ft
- •%H: commit hash
- •%h: abbreviated commit hash
- •%T: tree hash
- •%t: abbreviated tree hash
- •%P: parent hashes
- •%p: abbreviated parent hashes
- •%an: author name
- •%ae: author email
- •%ad: author date
- •%aD: author date, RFC2822 style
- •%ar: author date, relative
- •%at: author date, UNIX timestamp
- •%ai: author date, ISO 8601 format
- •%cn: committer name
- •%ce: committer email
- •%cd: committer date
- •%cD: committer date, RFC2822 style
- •%cr: committer date, relative
- •%ct: committer date, UNIX timestamp
- •%ci: committer date, ISO 8601 format
- •%e: encoding
- •%s: subject
- •%b: body
- •%Cred: switch color to red
- •%Cgreen: switch color to green
- •%Cblue: switch color to blue
- •%Creset: reset color
- •%m: left, right or boundary mark
- •%n: newline
-
GENERATING PATCHES WITH -P
When "git-diff-index", "git-diff-tree", or "git-diff-files" are run with a -p option, "git diff" without the --raw option, or "git log" with the "-p" option, they do not produce the output described above; instead they produce a patch file. You can customize the creation of such patches via the GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environment variables.What the -p option produces is slightly different from the traditional diff format.
- 1.It is preceded with a "git diff" header, that looks like this:
-
-
diff --git a/file1 b/file2
When rename/copy is involved, file1 and file2 show the name of the source file of the rename/copy and the name of the file that rename/copy produces, respectively.
-
- 2.It is followed by one or more extended header lines:
-
-
old mode <mode> new mode <mode> deleted file mode <mode> new file mode <mode> copy from <path> copy to <path> rename from <path> rename to <path> similarity index <number> dissimilarity index <number> index <hash>..<hash> <mode>
-
- 3.TAB, LF, double quote and backslash characters in pathnames are represented as \t, \n, \" and \\, respectively. If there is need for such substitution then the whole pathname is put in double quotes.
COMBINED DIFF FORMAT
"git-diff-tree", "git-diff-files" and "git-diff" can take -c or --cc option to produce combined diff. For showing a merge commit with "git log -p", this is the default format. A combined diff format looks like this:-
.ft C diff --combined describe.c index fabadb8,cc95eb0..4866510 --- a/describe.c +++ b/describe.c @@@ -98,20 -98,12 +98,20 @@@ return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1; } - static void describe(char *arg) -static void describe(struct commit *cmit, int last_one) ++static void describe(char *arg, int last_one) { + unsigned char sha1[20]; + struct commit *cmit; struct commit_list *list; static int initialized = 0; struct commit_name *n; + if (get_sha1(arg, sha1) < 0) + usage(describe_usage); + cmit = lookup_commit_reference(sha1); + if (!cmit) + usage(describe_usage); + if (!initialized) { initialized = 1; for_each_ref(get_name); .ft
- 1.It is preceded with a "git diff" header, that looks like this (when -c option is used):
-
-
diff --combined file
-
diff --c file
-
- 2.It is followed by one or more extended header lines (this example shows a merge with two parents):
-
-
index <hash>,<hash>..<hash> mode <mode>,<mode>..<mode> new file mode <mode> deleted file mode <mode>,<mode>
-
- 3.It is followed by two-line from-file/to-file header
-
-
--- a/file +++ b/file
-
- 4.Chunk header format is modified to prevent people from accidentally feeding it to patch -p1. Combined diff format was created for review of merge commit changes, and was not meant for apply. The change is similar to the change in the extended index header:
-
-
@@@ <from-file-range> <from-file-range> <to-file-range> @@@
-
A - character in the column N means that the line appears in fileN but it does not appear in the result. A + character in the column N means that the line appears in the last file, and fileN does not have that line (in other words, the line was added, from the point of view of that parent).
In the above example output, the function signature was changed from both files (hence two - removals from both file1 and file2, plus + to mean one line that was added does not appear in either file1 nor file2). Also two other lines are the same from file1 but do not appear in file2 (hence prefixed with ).
When shown by git diff-tree -c, it compares the parents of a merge commit with the merge result (i.e. file1..fileN are the parents). When shown by git diff-files -c, it compares the two unresolved merge parents with the working tree file (i.e. file1 is stage 2 aka "our version", file2 is stage 3 aka "their version").
EXAMPLES
git log --no-merges
- Show the whole commit history, but skip any merges
git log v2.6.12.. include/scsi drivers/scsi
- Show all commits since version v2.6.12 that changed any file in the include/scsi or drivers/scsi subdirectories
git log --since="2 weeks ago" -- gitk
- Show the changes during the last two weeks to the file gitk. The "--" is necessary to avoid confusion with the branch named gitk
git log --name-status release..test
- Show the commits that are in the "test" branch but not yet in the "release" branch, along with the list of paths each commit modifies.
git log --follow builtin-rev-list.c
- Shows the commits that changed builtin-rev-list.c, including those commits that occurred before the file was given its present name.
DISCUSSION
At the core level, git is character encoding agnostic.- •The pathnames recorded in the index and in the tree objects are treated as uninterpreted sequences of non-NUL bytes. What readdir(2) returns are what are recorded and compared with the data git keeps track of, which in turn are expected to be what lstat(2) and creat(2) accepts. There is no such thing as pathname encoding translation.
- •The contents of the blob objects are uninterpreted sequence of bytes. There is no encoding translation at the core level.
- •The commit log messages are uninterpreted sequence of non-NUL bytes.
- 1.git-commit-tree (hence, git-commit which uses it) issues a warning if the commit log message given to it does not look like a valid UTF-8 string, unless you explicitly say your project uses a legacy encoding. The way to say this is to have i18n.commitencoding in .git/config file, like this:
-
-
.ft C [i18n] commitencoding = ISO-8859-1 .ft
-
- 2.git-log, git-show and friends looks at the encoding header of a commit object, and tries to re-code the log message into UTF-8 unless otherwise specified. You can specify the desired output encoding with i18n.logoutputencoding in .git/config file, like this:
-
-
.ft C [i18n] logoutputencoding = ISO-8859-1 .ft
-
AUTHOR
Written by Linus Torvalds <torvalds@osdl.org>DOCUMENTATION
Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>.GIT
Part of the git(7) suiteNOTES
- 1.
- diffcore documentation
- diffcore.html
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre