Rechercher une page de manuel
dahdi_test
Langue: en
Version: 175955 (fedora - 06/07/09)
Section: 8 (Commandes administrateur)
NAME
dahdi_test --- Test if the DAHDI timer provides timely responseSYNOPSIS
dahdi_test [ -v ]DESCRIPTION
dahdi_test dahdi_test runs a timing test in a loop and prints the result of each loop. The test is as follows:It reads 8192 bytes from the DAHDI timer device (/dev/dahdi/pseudo). This should take exactly 8000 ms . It uses calls to gettimeofday(2) before and after that read to check that indeed exactly 8000ms have passed.
Values of 100% and 99.99% Are normally considered a definite pass. Values of 99.98% and 99.97% are probably OK as well.
OPTIONS
-v- Be more verbose: print one line per test.
-c count
- Run for count times instead of running forever.
FILES
/dev/dahdi/pseudo The device file used to access the DAHDI timer.SEE ALSO
dahdi_tool(8), dahdi_cfg(8), asterisk(8). gettimeofday(2)AUTHOR
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre