Rechercher une page de manuel
fence_ilo
Langue: en
Version: 2009-10-20 (fedora - 01/12/10)
Section: 8 (Commandes administrateur)
NAME
fence_ilo - Fence agent for HP iLODESCRIPTION
fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream. fence_ilo accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.Vendor URL: http://www.hp.com
PARAMETERS
- -o, --action=<action>
- Fencing Action (Default Value: reboot)
- -a, --ip=<ip>
- IP Address or Hostname This parameter is always required.
- -l, --username=<name>
- Login Name This parameter is always required.
- -p, --password=<password>
- Login password or passphrase
- -S, --password-script=<script>
- Script to retrieve password
- -z, --ssl
- SSL connection (Default Value: true)
- -r, --ribcl-version=<version>
- Force ribcl version to use
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -u, --ipport=<port>
- TCP port to use for connection with device
- -v, --verbose
- Verbose mode
- -D, --debug-file=<debugfile>
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --power-timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --shell-timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --login-timeout
- Wait X seconds for cmd prompt after login (Default Value: 10)
- --power-wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --retry-on
- Count of attempts to retry power on (Default Value: 3)
- --delay
- Wait X seconds before fencing is started (Default Value: 0)
ACTIONS
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- monitor
- Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
- metadata
The operational behavior of this is not known.
STDIN PARAMETERS
- action
- Fencing Action (Default Value: reboot)
- ipaddr
- IP Address or Hostname This parameter is always required.
- login
- Login Name This parameter is always required.
- passwd
- Login password or passphrase
- passwd_script
- Script to retrieve password
- ssl
- SSL connection (Default Value: true)
- ribcl
- Force ribcl version to use
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ipport
- TCP port to use for connection with device
- verbose
- Verbose mode
- debug
- Write debug information to given file
- version
- Display version information and exit
- help
- Display help and exit
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 10)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- retry_on
- Count of attempts to retry power on (Default Value: 3)
- delay
- Wait X seconds before fencing is started (Default Value: 0)
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre